Amerock self-close 3/8 inset hinge describes a semi-concealed face mount hinge that controls a 3/8 inch inset cabinet door, so doors sit correctly on the face frame while staying visually clean from the front. This hinge is part of Amerock Corporation functional hardware, so it is built as working cabinet hardware for daily use in kitchens, baths, or shop-built casework. The hinge design is semi-concealed, so part of the hinge is visible to show the champagne bronze finish while the working components stay tucked around the frame edge. It is a face mount hinge, so it mounts on the surface of a face frame instead of needing a cup hole in the door, which supports straightforward layout on traditional face-frame construction. The hinge is self-close, so the mechanism pulls the door shut at the end of travel, helping doors stay closed without relying only on magnetic catches.
This Amerock semi-concealed face mount hinge is designed as a screw-on hinge, so it attaches to the cabinet using screw holes in the hinge plates, giving installers a familiar installation pattern for face-frame work. Because it is a face mount hinge, layout happens on the frame surface, which supports positioning the hinge on narrow stiles without drilling large-diameter holes. The 3/8 inch inset configuration sets the door back from the frame edge, so hinge placement can be coordinated with other 3/8 inset doors along a bank of cabinets for consistent gaps. As a semi-concealed hinge, the working knuckle area sits at the door edge, so its profile helps define how close adjacent doors and fronts can run next to one another across the cabinet face.
This Amerock self-close 3/8 inset hinge is suited to face-frame cabinet construction where a 3/8 inch inset door layout is required, because its geometry is designed around that specific step between door and frame. As a semi-concealed hinge in the Semi-Concealed Hinges product class, it shows part of the hinge when the door is closed, which lines up well with traditional and transitional cabinet styles where visible hinges are part of the design. The hinge mounts on the face frame as a face mount hinge, so it works with wood face frames used in many shop-built and manufactured cabinets that do not use frameless construction. The champagne bronze finish on this BPR7928CZ hinge adds a warm metallic tone on the visible portions, which lets it coordinate with champagne bronze pulls or knobs across a cabinet run so the hardware finish reads consistently.
This Amerock semi-concealed hinge is part of the Amerock functional hardware series, and those items are tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength, and finish quality, so the hinge is validated for long-term opening and closing in demanding cabinet use. Exceeding KCMA requirements for cycle life means the hinge mechanism is tested through more open-close cycles than standard certification requires, which matters when cabinets in kitchens, baths, or shops see frequent daily operation. Strength testing beyond these standards shows that the hinge construction supports door loads within its intended application, giving installers confidence that properly sized doors will remain supported over time. Finish quality testing beyond the BHMS standards means the champagne bronze finish is evaluated under more aggressive conditions than basic requirements, which supports consistent color and surface condition along hinge leaves that remain visible on semi-concealed applications. Because durability, strength, and finish are validated at this level, installers can standardize on this Amerock self-close 3/8 inch inset face mount hinge across multiple projects knowing the hinge design, performance, and finish system are built around proven functional hardware criteria.
The Amerock self-close 3/8 inch inset face mount hinge is designed for face-frame cabinets, so it mounts on the frame surface and works with doors set 3/8 inch inset from the edge.
The 3/8 inch inset design positions the door so it partially overlays the frame and steps back three-eighths of an inch, helping installers keep reveals consistent along cabinet runs.
This hinge is a semi-concealed hinge, so part of the hinge shows when the door is closed while the working parts wrap the edge, supporting traditional styling with visible champagne bronze hardware.
The BPR7928CZ hinge is a screw-on face mount hinge, so it fastens to the cabinet face frame using screw holes in the hinge plate instead of a bored cup in the door.
The self-close function on this hinge pulls the door shut at the end of its swing, helping doors stay closed against the frame during everyday cabinet use without separate closing devices.
Amerock functional hardware series items, including this hinge, are tested in conditions exceeding KCMA and BHMS standards for cycle life, strength, and finish, supporting long-term cabinet performance.
The Amerock self-close 3/8 inset hinge, model BPR7928CZ, combines semi-concealed styling, face mount screw-on installation, and a 3/8 inch inset layout, giving cabinet builders a specific hinge solution for face-frame projects. Its membership in the Amerock functional hardware series, with testing beyond KCMA and BHMS standards for cycle life, strength, and finish quality, supports dependable performance on frequently used doors. For projects matching 3/8 inch inset face-frame construction with champagne bronze exposed hardware, this Amerock semi-concealed face mount hinge offers a focused option ready to integrate into new cabinet builds or updates.