Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 Silentia hinge mounts half overlay doors on both face-frame and frameless cabinets, delivering a damped, quiet close through Salice's Rapido expanding dowel system.
Half overlay is the configuration used wherever two doors meet on a single cabinet partition, each door covering roughly half the shared side. This hinge's half crank arm is engineered for that geometry: it sets the door at the correct offset so two doors hang side by side without colliding. The 35mm cup bores into the back of the door at a 45mm boring pattern, and the arm connects to a Salice base plate mounted to the cabinet, which is ordered separately. For a double-door run or a long bank of cabinets with shared partitions, this is the hinge that keeps the reveal even across the whole row.
The hinge body is steel finished in nickel, a neutral tone that sits comfortably alongside brushed pulls, knobs, and slide hardware without drawing attention to the hinge itself. The Silentia soft-close mechanism is built into the hinge, so no separate damper clip is needed. It works over the final closing arc, absorbing the door's momentum before contact, which protects both the finish and the cabinet box over years of daily use. Height and side adjustment let installers correct for minor variation in partition spacing after the doors are hung.
Cabinet shops running face-frame work and contractors finishing frameless kitchens both use this hinge, since the Series 100 is rated for both cabinet constructions. The Rapido expanding dowel mount is well suited to production environments where boring is done on a CNC and speed of plate installation matters. It is a reliable fit for standard doors in the 16 to 22mm thickness range. For doors thicker than 22mm, a thick-door hinge is the right move. If the project calls for full overlay instead of partial, a full overlay arm hinge in this series covers that configuration.
No. The hinge arm clips to a Salice base plate that is sold separately. Use a Salice-compatible plate matched to your cabinet construction and desired overlay position. Plates from other brands will not connect to this hinge.
The base plate uses expanding dowels that seat into pre-bored holes in the cabinet side, eliminating the need for plate screws during mounting. It is a fast, clean connection suited to shops with CNC-bored cabinet components.
The number depends on the door's height, width, and weight. As a general guide, doors up to about 40 inches typically use two hinges and taller doors need three or more, but the manufacturer's load table gives the exact count for your door dimensions.
No. Silentia soft-close uses a damper to slow the door before it contacts the cabinet, so it settles quietly. A self-close hinge uses a spring to pull the door shut and does not cushion the close. This hinge is soft-close.
When the job calls for half overlay doors that close quietly and line up cleanly across a bank of cabinets, this Salice Silentia hinge in nickel keeps the install moving and the finished result consistent.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2XX86BT Mfr# S2XX86BT | Silentia Hinge Spacers 0.6mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBS2XX86AT Mfr# S2XX86AT | 1.2mm Spacer for Silentia Series Hinges | ||||
Sold in: 1 Each |  UBS2XX86KT Mfr# S2XX86KT | Silentia Hinge Spacers 1.8mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBD1A6ACGSN Mfr# D9A6AC3SN | Silentia Hinge Cup Depth Gauge 12 mm | ||||
Sold in: 1 Each |  UBD2ABACGSN Mfr# D2ABACGSN | Silentia Hinge Cup Depth Gauge 15.5 mm | ||||
Sold in: 1 Each |  UBS1E637XY Mfr# S1E637XY | Series 100 & 700 86˚ Angle Restriction Clip, White (500/Box) |