Nickel Soft-Close Hinge for Full Overlay Doors on Face-Frame and Frameless Cabinets

This Salice Series 700 hinge brings Silentia soft-close to full overlay doors on both face-frame and frameless cabinets, with a dowel-mount cup that seats firmly in the door without screws.

Key Features

• Silentia integrated soft-close damps the door over the final degrees of travel so it settles silently every time.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving a clean, narrow reveal.
• 110 degree opening angle delivers the standard swing for everyday kitchen and bath cabinet access.
• Expanding dowel mount presses the 35mm cup into the door's bored hole for a firm mechanical connection with no cup screws.
• Works on face-frame and frameless cabinets when paired with the appropriate Salice base plate, sold separately.
• Nickel finish on steel coordinates with other nickel hardware across a run of cabinets.

Full Overlay Doors, Quiet Every Close

Full overlay is the most common door configuration in modern cabinetry: the door covers almost the entire cabinet side, and the narrow reveals between doors define the finished look. This hinge is built for that geometry. The straight arm sets the door at full overlay, and Series 700 Silentia soft-close cushions every close so the door never slams against the cabinet.

The 35mm cup bores into the back of the door at a 13.5mm depth, and the expanding dowel locks it in place mechanically without cup screws. That connection is fast to install and stays tight through years of daily use. The hinge arm then connects to a Salice base plate mounted to the cabinet. The plate is a separate purchase, matched to your cabinet construction and the overlay position you need. Use Salice plates with this hinge; plates are not interchangeable across brands.

Steel Construction, Nickel Finish

The hinge body is steel with a nickel finish. In a kitchen or bath where the pulls, knobs, and other visible hardware are already in nickel, this finish keeps the concealed hardware consistent behind the door. The Series 700 platform is Salice's premium concealed line, built to tighter tolerances than the value Series 200, and the Silentia damper is integrated into the hinge rather than added on. There is no separate adapter to source or install.

Where This Hinge Fits

This is the right hinge for cabinet shops and installers specifying full overlay doors on either frameless or face-frame boxes where a quiet, damped close is the standard. It suits production runs in kitchens and baths and works equally well in single-project installs. The 45mm boring pattern is the standard spacing, so it drops into pre-bored doors without any layout adjustment. For face-frame work, pair it with a Salice face-frame plate; for frameless boxes, use a Salice frameless plate. Doors should fall in the standard 16 to 22mm thickness range. For doors thicker than 22mm, a thick-door hinge is the correct choice.

Common Questions

A Consistent, Quiet Result Across Every Door

Specify this hinge when full overlay doors need a damped, silent close and a nickel finish that holds its own alongside the rest of the hardware in the space.