Amerock Aloft edge pull is a satin nickel aluminum tab pull designed for contemporary cabinet and furniture projects. The 6-9/16 in (167 mm) center-to-center drilling sets a consistent handle spacing that suits longer drawers and doors often found in modern layouts. Its narrow 11/16 in (17 mm) width creates a slim visual line that keeps fronts looking clean while still giving enough surface to grab in daily use. The 9-3/4 in (248 mm) overall length runs closer to the edge of wider fronts, which helps handles read as part of the design instead of separate parts. A 1-9/16 in (40 mm) projection brings the pull forward enough for fingers to clear the cabinet face comfortably. The Aloft collection design focuses on a subtle, graceful curvature, so this pull reads as a low-profile, visually seamless option for contemporary spaces.
The 6-9/16 in (167 mm) center-to-center dimension provides a clear drilling distance for installers setting up jigs or CNC programs, which simplifies repeating the same hole pattern across a job. With a 9-3/4 in (248 mm) overall length, the pull extends beyond the mounting hole span, giving some visual margin at each end so the hardware does not look cramped against the drilling points. The 11/16 in (17 mm) width means the pull seats on a relatively narrow footprint, which matters when working near panel edges or on thinner rails. A 1-9/16 in (40 mm) projection creates working clearance from the cabinet face, helping hands get behind the pull even when doors and drawers sit close together in tight grids.
The Amerock Aloft series 6-9/16 in (167 mm) center to center satin nickel tab pull is designed for contemporary spaces, so it suits modern kitchens, baths, and built-ins that favor clean lines. The satin nickel finish provides a soft metallic tone that coordinates well with many contemporary faucets and hinges, giving projects a consistent hardware palette. At 9-3/4 in (248 mm) length, this pull works particularly well on wider drawers or tall doors, where its extended footprint balances larger faces. The narrow 11/16 in (17 mm) width and subtle curvature let the pull sit visually light on the surface, which helps highlight door and drawer fronts instead of dominating them. Because the pull is made from aluminum, it stays lighter than many solid metal options, which is useful on oversize fronts where multiple pulls might otherwise add weight.
The 6-9/16 in (167 mm) center-to-center measurement provides a precise mounting dimension that supports accurate jig setup, which helps keep hardware perfectly aligned across a bank of cabinets. The matching 9-3/4 in (248 mm) base length on both sides of the pull means edges line up cleanly along fronts, aiding in visual straightness during installation. A 1-9/16 in (40 mm) projection sets a predictable standoff from the cabinet face, so clearances between adjacent doors and drawers can be planned around a known depth. The consistent 11/16 in (17 mm) base width gives a repeatable reveal at the edge of doors or drawers, helping installers maintain the same visual proportion from cabinet to cabinet. Working with the Amerock BP36745G10 part number ties all these dimensions to a specific pull, which keeps reorders and layout drawings aligned to the same hardware.
The Amerock Aloft edge pull uses a 6-9/16 in (167 mm) center-to-center mounting, which sets the drilling distance for consistent hole placement across cabinets.
The BP36745G10 Aloft tab pull is 9-3/4 in (248 mm) in overall length, which helps it span a wider portion of cabinet doors and drawers for a balanced look.
This satin nickel cabinet pull projects 1-9/16 in (40 mm) from the surface, giving useful finger clearance while keeping the hardware profile relatively low on the cabinet face.
The Amerock Aloft series pull is made from aluminum, which keeps the pull lightweight and suitable for use on larger cabinet doors and drawers.
The 167 mm center to center pull has a satin nickel finish, providing a soft metallic appearance that pairs well with many contemporary fixtures.
This Amerock aluminum tab pull has a width of 11/16 in (17 mm), giving it a slim footprint that supports a clean, modern cabinet look.
The Amerock Aloft edge pull BP36745G10 brings a 6-9/16 in (167 mm) center-to-center layout, 9-3/4 in (248 mm) length, and 1-9/16 in (40 mm) projection together in a satin nickel aluminum design suited to contemporary projects. These dimensions give installers a clear drilling pattern and predictable clearances, while the slim 11/16 in (17 mm) width supports clean lines on doors and drawers. Use this satin nickel tab pull when a modern, linear look and consistent mounting geometry are priorities across a full cabinet run.
Sold In: 1 Each
