Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Aloft tab pull turns a standard cabinet opening into a clean, contemporary motion by using a slim edge-mounted design that gives doors and drawers a streamlined look. The polished nickel finish reflects surrounding light, so fronts stay visually bright while the hardware keeps a low profile. The aluminum construction keeps the pull light in weight, which supports easy handling during layout and fastening on longer runs of doors or wide drawers. A 6-9/16 in (167 mm) center-to-center dimension sets a consistent hole pattern, which is useful when matching existing layouts or repeating the same pull across a bank of fronts. Overall length at 9-3/4 in (248 mm) gives fingers more contact area behind the edge, helping with grip along wider doors without adding visual bulk.
The Amerock BP36745PN pull centers on a 6-9/16 in (167 mm) drilling pattern, so installers mark and bore two mounting points at this fixed distance to match the integrated posts. With a 9-3/4 in (248 mm) base length, the pull overhangs past the fastener locations, which helps cover slight layout inaccuracies along the edge while still presenting a straight visual line. The 11/16 in (17 mm) base width defines how much of the door or drawer edge is occupied by metal, which matters when positioning pulls near adjacent fronts. A 1-9/16 in (40 mm) projection sets how far the grip surface stands off the face, giving consistent clearance for fingers along all matching Aloft installations.
The aluminum construction of this Aloft edge pull keeps weight low along the 9-3/4 in (248 mm) length, which is useful on large cabinet doors or oversized drawers where multiple pulls may be used in a row. Its polished nickel finish pairs well with contemporary cabinet styles, so banks of doors maintain a uniform metallic accent while hinges and other decorative hardware from the same finish family align visually. The 6-9/16 in (167 mm) center-to-center sizing suits full-size base and wall cabinets where a wider hand grip is preferred at the edge. With an 11/16 in (17 mm) width, the tab stays narrow, which is helpful on tight reveals or near appliance panels where extra clearance between fronts is limited.
The defined 6-9/16 in (167 mm) center-to-center drilling of this Amerock Aloft series pull simplifies jig setup, because installers can lock in that spacing once and repeat it across every door and drawer. The 9-3/4 in (248 mm) base length offers enough overhang beyond the screw points to visually balance taller doors, maintaining even margins at the top and bottom of the pull. A 1-9/16 in (40 mm) projection standardizes finger clearance, which keeps user feel consistent between upper and lower cabinets, reducing variation in how hard the pull needs to be grasped. The 11/16 in (17 mm) base width leaves more face area visible on narrow fronts, supporting clean sightlines on modern cabinets. The polished nickel finish on aluminum coordinates with other polished nickel decorative hardware and moldings, helping projects align across handles, pulls, and related Amerock pieces.
The Amerock Aloft BP36745PN uses a 6-9/16 in (167 mm) center-to-center spacing, which sets the distance between the two mounting points for consistent cabinet drilling.
The Amerock BP36745PN pull has a 9-3/4 in (248 mm) overall length, so it spans a substantial section of the cabinet edge for a continuous hand grip.
The Aloft series BP36745PN pull is made from aluminum with a polished nickel finish, giving a bright metallic look and a smooth feel on cabinet doors and drawers.
The Amerock Aloft BP36745PN projects 1-9/16 in (40 mm) from the cabinet face, providing consistent finger clearance while preserving a low-profile aesthetic.
The BP36745PN pull measures 11/16 in (17 mm) in width, so it occupies a slim strip of the cabinet edge and maintains a minimalist tab appearance.
The BP36745PN edge pull is part of the Amerock Aloft collection, which is designed around a subtle profile and visually seamless contemporary lines.
The Amerock Aloft tab pull with 6-9/16 in (167 mm) center-to-center drilling, 9-3/4 in (248 mm) length, and 1-9/16 in (40 mm) projection gives a defined, repeatable geometry for modern cabinet layouts. Its polished nickel finish on aluminum supports contemporary kitchens, baths, and built-ins where a slim, bright edge detail is preferred. For projects built around Amerock decorative hardware and moldings, this Aloft piece aligns visually with the wider collection while keeping installation dimensions predictable across every cabinet front.
Sold In: 1 Each
