Amerock Kamari Knob Gunmetal For Cabinets

Amerock Kamari knob gunmetal is a 1-3/16 in (30 mm) long by 1-3/16 in (30 mm) wide cabinet knob that provides a compact, consistent grip point across doors and drawers. The 1 in (25 mm) projection sets the hand off the face of the cabinet just enough for a comfortable pull while keeping profiles tight in narrow walkways. The Kamari collection features a scalloped surface inspired by sand patterns, which breaks up fingerprints and visually hides light wear in everyday use. The gunmetal finish establishes a dark, modern tone that pairs with a wide range of cabinet colors in kitchen, bath, or shop spaces. A zinc construction gives the knob a solid feel in the hand while supporting everyday residential or shop cabinet duty.

Key Kamari Knob Details For Daily Use

• The 1-3/16 in (30 mm) length and 1-3/16 in (30 mm) width create a near-square pull area, giving installers a predictable center point when laying out knob locations across multiple fronts.
• The 1 in (25 mm) projection positions fingers clear of the cabinet face, which reduces knuckle contact on face frames while still keeping the knob low profile around tight islands or galley runs.
• The Kamari collection scalloped surface introduces texture that helps fingers catch the knob, supporting a secure grip on heavier drawers or tall pantry doors.
• The gunmetal finish delivers a dark tone that visually anchors on light cabinets and blends into darker finishes, supporting cohesive hardware runs in contemporary designs.
• The zinc material provides a solid, weighted feel at this compact size, which helps doors and drawers close with a more substantial hand contact point.
• The Amerock Corporation brand and BP36821GM part number identify this knob clearly for repeat orders or matching additional cabinets on phased projects.

Installation Dimensions And Mounting Fit

This Amerock Kamari series knob uses a 1-3/16 in (30 mm) length and 1-3/16 in (30 mm) width, so installers can center it easily on standard rail and stile widths without crowding panel details. The 3/8 in (10 mm) base length and 3/8 in (10 mm) base width keep the footprint tight, which works well on narrow frames or smaller drawer fronts. The 1 in (25 mm) projection sets the knob out from the door enough to clear typical finger thickness while keeping loads close to the mounting surface, which supports a solid feel during operation. The screw size is 8-32 x 1 in, matching a common cabinet drilling workflow for both new cabinet construction and hardware swaps on existing doors and drawers.

Using The Kamari Gunmetal Knob In Projects

Where This Kamari Gunmetal Cabinet Knob Fits

The Kamari series design draws inspiration from sand patterns on exotic volcanic beaches, and that scalloped surface carries across the face of this 1-3/16 in (30 mm) knob to add visual movement on flat cabinet fronts. On simple slab or shaker doors, the pattern introduces texture without adding extra parts, giving a single knob the role of both hardware and design accent. The compact 1-3/16 in by 1-3/16 in size suits small bath vanities, kitchen uppers, and shop storage where large pulls are not required. The gunmetal finish works as a dark accent against light-painted finishes and still coordinates with deeper wood tones, simplifying hardware selection across mixed-room projects. As part of the Kamari collection, this knob aligns with the same design language, so multiple doors and drawers can share a unified scalloped look.

Details That Support Repeatable Cabinet Results

The consistent 1-3/16 in (30 mm) length and width give installers a clear center reference, which speeds layout when drilling repetitive knob locations across banks of doors. The 3/8 in (10 mm) base length and width help position the knob without overlapping routed profiles or narrow stile edges, keeping hardware aligned with the cabinet geometry. A 1 in (25 mm) projection keeps leverage close to the door face, which helps reduce flex on the mounting point over time in normal use. The zinc material construction provides a solid feel at the grip, supporting confident pulls on loaded drawers or tall doors. The Amerock BP36821GM part number clearly identifies this exact Kamari gunmetal knob for future matching or replacement, helping maintain visual continuity as cabinets are added or modified.

Common Questions About The Kamari BP36821GM Knob

Selecting This Kamari Knob For Your Project

The Amerock Kamari series gunmetal 1-3/16 in (30 mm) knob combines a scalloped decorative face, zinc construction, and a 1 in (25 mm) projection to handle everyday cabinet use. With a compact 3/8 in (10 mm) base and clearly defined BP36821GM part number, it slots cleanly into layout plans and reorder lists when additional cabinets or future phases follow the same design.