Rev-A-Shelf 4WCTM 15" Maple 1-35 Quart Top-Mount Waste Pullout with Silver Bin and Standard Slides, 4WCTM-1816DM-1

Choose a Rev-A-Shelf top mount waste pullout

Rev-A-Shelf top mount waste pullout is a door-mount cabinet waste system built for buyers who want a sturdy pull-out trash setup in a kitchen cabinet. This Rev-A-Shelf 4WCTM model is a top mount trash pullout with a solid maple frame, one 35 quart silver bin, and standard heavy-duty ball bearing slides. The unit is designed for door mounting only, which matters when planning a door mount waste pullout installation. This single bin trash pull out also includes a plastic storage bin at the back of the frame. Rear adjustable mounting brackets help the cabinet trash pull out adapt to cabinet depth variances, and the slide system includes 1 inch of over-travel for easier access to the waste bin and rear storage area.

See how this cabinet trash pull out helps

• Solid maple wood frame - The Rev-A-Shelf waste pullout uses a rigid wood frame that supports repeated daily pull-out use in kitchen cabinetry.
• Door mounting only design - This top mount trash pullout is made for direct door attachment, helping create one smooth pull action when the cabinet door opens.
• One 35 quart silver bin - The single bin trash pull out provides a defined waste capacity for kitchens that need one main trash container.
• Rear adjustable mounting brackets - The Rev-A-Shelf top mount waste pullout can accommodate variances in cabinet depth for a more controlled installation.
• Heavy-duty ball bearing slides - The standard slide waste pullout moves on ball bearing hardware built for regular cabinet use.
• One inch over-travel - The slide travel extends the cabinet trash pull out farther so the bin is easier to reach during cleanup and bag changes.
• 150 lb maximum load capability - The waste pullout slide system is rated by the manufacturer for substantial combined load support during normal use.
• Rear plastic storage bin included - This 35 quart trash pull out includes a back storage bin sized 9-1/2 inches long by 6-1/2 inches wide by 5-5/8 inches deep for small supplies.

Confirm fit for this top mount trash pullout

Key specs to confirm: This Rev-A-Shelf model is described as a 15 inch by 16 inch deep top-mount waste pullout for a 1-1/2 inch face frame application. Buyers should confirm cabinet opening width, interior depth, face frame condition, and door-mount suitability before ordering. Because the 4WCTM Series comes in different versions for 1-1/2 inch, 1-5/8 inch, 1-3/4 inch face frame and frameless applications, it is important to match this exact version to the cabinet style. The slide system is described as heavy-duty ball bearing slides with 1 inch over-travel and a 150 lb maximum load. Any additional fit, load, or compliance details not shown here should be confirmed with the manufacturer or technical documentation.

What's included: One fully assembled maple waste pullout frame, one 35 quart silver waste bin, standard heavy-duty ball bearing slides, rear adjustable mounting brackets, and one rear plastic storage bin.

What to verify before ordering: Confirm your cabinet accepts a door mount waste pullout, check that the opening and depth suit a 15 inch by 16 inch deep unit, verify your face frame style matches the 1-1/2 inch application, and make sure the door and cabinet can support the intended installation method.

Use this maple waste pullout with confidence

Match this door mount waste pullout to daily use

A maple waste pullout like this is often selected for kitchen base cabinets where the user wants the trash container hidden but still easy to access during prep and cleanup. Because this Rev-A-Shelf waste pullout is designed for door mounting only, it works best in installations where the cabinet door is meant to pull the waste frame out as one unit. That setup can simplify daily use because the user does not need to open a door first and then reach inside for a separate sliding frame.

The single 35 quart configuration fits buyers who want one main waste bin rather than a two-bin sorting setup. In smaller kitchens, a single bin trash pull out can free up usable cabinet space while still keeping trash off the floor and out of sight. This model also includes a rear plastic storage bin, which can help keep small cleaning items or liners in the same cabinet area. The storage bin dimensions are listed as 9-1/2 inches long, 6-1/2 inches wide, and 5-5/8 inches deep, so buyers can decide whether that extra compartment fits their intended use.

Installers also tend to focus on how forgiving a unit is when cabinet interiors vary slightly. The rear adjustable mounting brackets on this door mount waste pullout are important because cabinet depth is not always perfectly consistent. That adjustment feature can help during fitting and alignment. The heavy-duty ball bearing slides with 1 inch over-travel also support easier access to the bin and rear area. If your project involves a face frame cabinet, confirm that this exact model matches a 1-1/2 inch face frame application. If your cabinet is frameless or uses a different face frame dimension, verify the correct 4WCTM version before purchase.

Compare this standard slide waste pullout design

When buyers compare cabinet trash pull out options, the main differences usually come down to mounting method, frame material, bin count, and how much adjustment the installer gets. This Rev-A-Shelf top mount waste pullout stands out for clear, jobsite-relevant details: a solid maple frame, door-mount-only operation, rear adjustable brackets, and heavy-duty ball bearing slides. Those are practical details that matter more than broad marketing claims.

Some waste pullout designs are chosen for multi-bin sorting, while others are selected for a simpler single-bin layout. This model is the straightforward choice for buyers who want one 35 quart trash pull out with a rear storage area. The included over-travel is also useful because it helps the bin move farther out from the cabinet, which can improve access during bag removal and cleaning. The fully assembled construction can also reduce setup time compared with products that require more frame assembly before installation.

Another point buyers often compare is cabinet fit. The 4WCTM Series is offered in multiple versions for different face frame and frameless conditions, so this exact RS4WCTM-1816DM-1 model should be treated as a fit-specific purchase rather than a universal cabinet trash pull out. That is a positive for installers who want a model tied to a defined application, but it also means the opening, frame style, and mounting plan should be checked carefully. For a buyer who wants a Rev-A-Shelf waste pullout with a wood frame, one silver bin, and standard slides, this product provides a clear and well-defined configuration.

Check common Rev-A-Shelf waste pullout questions

Order the right single bin trash pull out

RS4WCTM-1816DM-1 is a fit-specific Rev-A-Shelf top mount waste pullout for buyers who need one 35 quart silver bin, a solid maple frame, and standard heavy-duty slides. Before purchase, confirm your cabinet opening, interior depth, and 1-1/2 inch face frame application, and make sure your project is set up for door mounting only. Included components are the assembled pullout frame, waste bin, rear storage bin, slides, and adjustable rear brackets. A quick fit check now helps avoid installation delays later.