Compx National RemovaCore disc tumbler lock plug, bright nickel, keyed to C346A/master keyed M47054010-346-14A is a removable core that works with separate cylinder assemblies for cam turn locks. The bright nickel finish identifies the plug clearly at the cabinet and provides a clean, professional look on visible furniture or fixture fronts. The factory master keyed RemovaCore design means this plug works within a master key system, so keyed-alike or master-keyed setups can be organized without changing the installed cylinder assemblies. Being keyed to C346A with master keyed M47054010-346-14A means the core follows a defined keying pattern, which matters when matching existing Compx National master keyed disc tumbler systems. The removable core plug format separates the core from the lock housing, allowing cylinder assemblies to stay in place while cores are handled or rekeyed as needed.
The cylinder assembly that works with this RemovaCore plug requires a 3/4 inch diameter hole for installation, so casework boring can follow that single hole size across matching cabinets. The related cam turn locks can be arranged so the cam turns 90 degrees when one stop washer is used, giving a quarter-turn action for many drawer or door layouts. For situations needing more travel, 90 degree and 180 degree cam turn locks use two stop washers to allow either 90 degree or 180 degree cam rotation based on the application, so the same lock family can match different swing or latching requirements.
The Web Description states that these disc tumbler cam turn locks are suited for drawers and for right-hand or left-hand doors that may be lipped, flush, or overlay, so one lock style can serve varied cabinet construction. The separate core plug and cylinder assembly format means the M47054010-346-14A plug seats into a compatible lock housing, which then carries the cam hardware that drives the latch point. The cam hardware options referenced, with straight and formed cams, give different extensions and offset, so once the plug is in place, the chosen cam can reach the strike or frame as needed for that cabinet build. Because the RemovaCore locks are factory master keyed, the same plug style supports wider key control strategies when using eligible Compx National master keyed disc tumbler systems.
The requirement for a 3/4 inch diameter hole for the cylinder assembly standardizes the casework drilling pattern, so installers can bore consistent holes for multiple locks using the same core style. The ability of 90 degree cam turn locks to use one stop washer for 90 degree rotation or two stop washers for 90 or 180 degree rotation lets the installer choose the throw that best positions the cam against the strike, which reduces rework when door clearance or overlay varies. The note that once assembled the master key for the RemovaCore will open any pre-assembled factory master keyed Compx National disc tumbler locks (KAMKD or KDMKD) means this plug participates in a broader key hierarchy, which matters when planning access levels across several cabinets or work areas. The design where the key is removable only in the locked position supports consistent locking habits, because the lock plug retains the key whenever the cabinet is left open.
The M47054010-346-14A is a Compx National RemovaCore disc tumbler lock plug used in cam turn locks, so it provides the keying function while the separate cylinder assembly carries the cam.
The RemovaCore locks are factory master keyed, so this plug can be part of a master key system where one master key operates multiple compatible disc tumbler locks.
This RemovaCore plug is keyed to C346A and master keyed M47054010-346-14A, so its keying aligns with that specific Compx National master keyed setup.
The cylinder assembly used with this RemovaCore plug requires a 3/4 inch diameter hole, so cabinet boring can follow that standard dimension.
These cam turn locks are described for drawers and for right-hand or left-hand doors that may be lipped, flush, or overlay, fitting common cabinet configurations.
The lock plug system allows the key to be removable in the locked position only, keeping the key in the lock whenever the cabinet remains unlocked.
The Compx National RemovaCore disc tumbler lock plug in bright nickel, keyed to C346A and master keyed M47054010-346-14A, supports master keyed cam turn lock layouts using separate cylinder assemblies. When a 3/4 inch cylinder hole pattern, drawer or door use, and factory master keyed Compx National disc tumbler systems all align with the project, this removable core plug offers a defined way to match key control with the selected cam turn locks.
Sold In: 1 Each
