CompX National Removacore cam lock is a 90 degree cam turn lock in a bright nickel finish designed for drawers and right-hand or left-hand doors that are lipped, flush, or overlay. The lock uses a cylinder assembly that requires a 3/4 inch diameter hole for installation, which helps standardize boring operations on cabinets and casework. The product uses a separate core plug and cylinder assembly, so the core plug and lock housing are handled as two components. This unassembled format supports using factory master keyed Removacore cores across multiple lock locations. Once assembled, the master key for the Removacore system will open any pre-assembled disc tumbler from CompX National that is factory master keyed under KAMKD or KDMKD, which supports keyed control across a project. The manufacturer part number M5-7054C-14A identifies this specific bright nickel cylinder assembly.
This CompX National cylinder assembly requires a 3/4 inch diameter hole for installation, so boring operations are based on this single dimension across all locations using this lock. The product is designed as a separate core plug and cylinder assembly, meaning the cylinder housing is installed first and the core plug is then installed with a control key. The key is removable in the locked position only, so the cylinder is configured to retain the key when the cam is in the unlocked position. This behavior helps indicate lock status by whether the key can be withdrawn. The 90 degree cam turn positions the cam within a quarter turn between locked and unlocked, which simplifies handle motion expectations for users.
This CompX National Removacore unassembled cam lock is intended for drawers and right-hand or left-hand doors, including lipped, flush, or overlay construction, so one lock style can serve varied door designs within the same project. The required 3/4 inch diameter hole defines where the cylinder assembly seats through the panel, which guides layout for both wood and other panel materials in cabinetry. The cylinder measures 1-3/16 inch, giving a consistent reference for front thickness and back side cam reach. This product is part of the locks and latches category under cam locks, so its function is to rotate a cam behind the edge of the drawer or door to hold it closed. The bright nickel finish supports use in visible locations such as cabinet fronts and fixture faces where appearance matters alongside function.
Removacore locks are factory master keyed, so each cylinder can be set up with individual keys while still responding to a single master key for supervisory access across many cabinets. Once assembled, the Removacore master key will open any pre-assembled disc tumbler from CompX National that is factory master keyed under KAMKD or KDMKD, which allows one master key to operate both this cylinder assembly and compatible disc tumbler locks. The design uses a separate core plug and cylinder assembly, so the housing can be installed and then populated with core plugs as needed using a control key to install those plugs into the cylinder assembly. The key removable in locked position only detail means the key is withdrawn only when the cam is in the secure position, giving an immediate indication that the lock has been returned to locked status after use.
This CompX National Removacore cam lock is designed for drawers and right-hand or left-hand doors, including lipped, flush, or overlay construction, so it can be used across varied cabinet and casework layouts.
The cylinder assembly requires a 3/4 inch diameter hole for installation, which standardizes boring operations and layout when repeating this lock across multiple cabinet or fixture locations.
This product is a 90 degree cam turn lock, so the cam rotates a quarter turn between locked and unlocked positions, providing a short, defined motion for operation.
Removacore locks are factory master keyed, and once assembled the Removacore master key will open any pre-assembled disc tumbler from CompX National that is factory master keyed KAMKD or KDMKD.
This lock is configured so the key is removable in the locked position only, which means the key stays in the cylinder when unlocked and can be withdrawn only after returning the lock to locked.
The 1-3/16 inch cylinder length defines the barrel size for this cam lock, guiding how it fits through cabinet fronts and how the cam aligns behind the panel edge.
The CompX National Removacore unassembled cam lock M5-7054C-14A combines a 90 degree cam turn, 1-3/16 inch cylinder, and 3/4 inch mounting hole requirement in a bright nickel finish that matches common cabinet hardware. The separate core plug and cylinder assembly format fits projects using factory master keyed Removacore systems where a master key must operate many locks across drawers and right-hand or left-hand doors. For cabinet and fixture work using KAMKD or KDMKD master keyed disc tumbler locks from CompX National, this cylinder assembly keeps hardware style and keying strategy aligned.
Sold In: 1 Each
