CompX National Removacore cam lock is a bright nickel cylinder assembly designed as a factory master keyed solution for cam lock applications. The cylinder assembly works with separate Removacore core plugs and provides a consistent housing whenever a keyed cam lock is required across multiple cabinets or fixtures. This cam lock uses a 3/4 inch diameter hole for installation, so layout and boring can follow a simple, repeatable pattern across doors and drawers. The assembly is set up so the key is removable in the locked position only, which helps keep doors and drawers unlocked only when a key is present. The design uses a control key to install the core plug into the cylinder assembly, which separates day-to-day user access from core installation and changeout work. Once assembled with a Removacore plug, this housing supports master keyed access on KAMKD or KDMKD systems.
This CompX National cylinder assembly requires a 3/4 inch diameter hole for installation, giving installers a clear boring dimension for both shop and field work. The housing works with a trim washer and a spur washer for wood, which helps seat the cylinder firmly against the face while gripping the substrate. Mounting nuts secure the housing from the rear, so the lock stays tight through repeated door and drawer use. Two cams - a straight cam with 1-1/2 inch extension and a formed cam with 1-1/8 inch extension and 11/32 inch offset - provide options for reaching different strikes or frame edges without changing the cylinder location. The control key requirement for installing the core plug into the cylinder assembly supports organized key control practices on master keyed projects.
This Removacore cylinder assembly is designed for cam lock applications on drawers and on right-hand or left-hand doors that are lipped, flush, or overlay. The bright nickel finish provides a clean appearance on cabinet faces in woodworking and casework installations. With a maximum thickness capacity of 1-1/8 inch, the lock fits many standard cabinet doors and drawer fronts without special build-up. The two supplied cam styles - straight with 1-1/2 inch extension and formed with 1-1/8 inch extension and 11/32 inch offset - allow the installer to reach the cabinet frame, strike, or keeper from a consistent cylinder location. The use of a spur washer for wood applications helps the housing bite into the substrate, supporting cabinets built from typical woodworking materials.
Removacore locks in this cylinder assembly are factory master keyed, which means assembled units using compatible Removacore plugs operate within a controlled key system for KAMKD or KDMKD series. Once assembled, the master key for the Removacore system will open any pre-assembled disc tumbler from CompX National that is factory master keyed to those series, aligning this lock with broader facility key plans. The cylinder assembly accepts a separate core plug and uses a control key to install that plug, so core changes or re-keying tasks can be performed without replacing the housing in the door or drawer. The key is removable in the locked position only, which supports a consistent locked/unlocked status whenever the operating key is present or absent. The option to configure the cam for 90 degree or 180 degree rotation using the stop washers lets the same lock align with different door swing or latch travel needs while staying within the same master keyed system.
This Removacore cam lock is suited for drawers and right-hand or left-hand doors that are lipped, flush, or overlay, so it can secure a range of cabinet and casework layouts.
The M5-7054L-14A cylinder is designed for a maximum thickness of 1-1/8 inch, fitting many standard cabinet doors and drawer fronts without special construction changes.
This cam lock cylinder assembly requires a 3/4 inch diameter hole, allowing straightforward drilling setups in both shop production and onsite installation.
The 90 degree cam turn lets the cam rotate a quarter turn to engage or release the latch, matching simple open/close movements common on many cabinet doors and drawers.
This Removacore lock is factory master keyed, and once assembled it works with master keys that open compatible pre-assembled disc tumbler locks in KAMKD or KDMKD series.
The key removable in locked position only design keeps the lock engaged whenever the key is taken out, helping maintain a consistent secured state for doors and drawers.
This CompX National Removacore cam lock cylinder assembly provides a bright nickel housing, defined 3/4 inch mounting hole, and cams sized for common cabinet geometry. The factory master keyed Removacore design ties individual cabinets into broader KAMKD or KDMKD key systems. With support for drawers and right-hand or left-hand doors in lipped, flush, or overlay styles, it covers varied casework while using one cylinder standard. For projects needing controlled access and consistent boring dimensions, this M5-7054L-14A assembly offers a master keyed cam lock platform ready for coordinating with separate core plugs.
Sold In: 1 Each
