RemovaCore disc tumbler lock plug from CompX National provides the keyed core for compatible cam locks so you can set up furniture and cabinet security around a controlled key system. This bright nickel plug is keyed to C642A and is factory master keyed, which lets it work within a broader master key system where needed. As part of the RemovaCore line, this core plug is designed to work with a separate cylinder assembly, giving you flexibility to configure cams and housings for drawers or doors. The core design supports right-hand or left-hand doors, whether lipped, flush, or overlay, which helps one core standardize projects across mixed cabinet styles. This plug is built to operate disc tumbler cam locks that can be set for 90 degree or 180 degree cam turns, so you can match rotation to the application.
This RemovaCore disc tumbler lock plug installs into a matching cylinder assembly that requires a 3/4 inch diameter hole, so casework can be bored with a common cam lock size. The system uses a control key to install core plugs into the cylinder assembly, which lets you secure or change cores without disturbing the mounted housing. The key is removable in the locked position only, helping keep doors and drawers locked when the key is withdrawn. When used with cam turn locks that ship with appropriate stop washers, the assembly can be configured for 90 degree only rotation or for 90 degree and 180 degree rotation, giving flexibility for different cabinet geometries and latch strikes.
This CompX National RemovaCore disc tumbler lock plug is intended for furniture, drawers, and cabinet doors where cam locks are appropriate. It works with separate cylinder assemblies that mount in a 3/4 inch diameter bore, which matches many casework boring patterns. The core supports right-hand or left-hand swing doors, including lipped, flush, and overlay designs, allowing it to serve mixed door styles in the same project. In drawer applications, the plug operates the same cam lock action, so a single key system can control both doors and drawers within a woodworking installation. Because the core is factory master keyed within the Compx National RemovaCore system, it can participate in master key schemes where individual keys and master keys both operate pre-assembled disc tumbler locks designated KAMKD or KDMKD.
The keyed-to-C642A, factory master keyed RemovaCore plug simplifies key control by letting one master key open any compatible pre-assembled disc tumbler locks from Compx National that share the factory master keying, which can streamline access management across large casework installations. Using a separate core plug and cylinder assembly means the same keyed core can be paired with housings that offer straight or formed cams, allowing the installer to choose the correct cam extension and offset for the door or drawer construction while keeping the same key pattern. The requirement for a control key during plug installation into the cylinder assembly allows cores to be swapped or serviced while the housing stays firmly mounted in the wood or panel. Key removal in the locked position only reduces the chance of leaving a cam partially rotated, which supports consistent latch engagement on doors and drawers. Since assembled locks like Compx National C8053 are not master keyed in the same way and cannot be mixed with this product for master keying, selecting this RemovaCore plug helps maintain a uniform master keyed group based on factory specifications.
The RemovaCore disc tumbler lock plug works with compatible Compx National cylinder assemblies and cam turn locks, forming a cam lock suited to drawers and cabinet doors that use this housing style.
The matching cylinder assembly for this core requires a 3/4 inch diameter hole, which lets installers bore a standard cam lock opening in cabinet or furniture panels.
The master keyed RemovaCore system lets one master key open this plug and other factory master keyed Compx National disc tumbler locks, simplifying key management across multiple locks.
The RemovaCore plug installs into the cylinder assembly using a control key, so the core can be inserted or removed while the lock housing remains fixed in the panel.
The RemovaCore disc tumbler lock plug allows the key to be removed only in the locked position, helping keep the cam fully engaged when the key is taken out.
This RemovaCore plug cannot be mixed with assembled locks such as C8053 for master keying, because those assembled locks are not factory master keyed in the same way.
The CompX National RemovaCore disc tumbler lock plug in bright nickel gives you a keyed-to-C642A, factory master keyed core that works with 3/4 inch bore cylinder assemblies and cam turn locks. For projects needing coordinated drawer and door control under a master key system, this core plug offers a consistent key platform that supports right-hand and left-hand doors and drawer fronts built with lipped, flush, or overlay construction. Use this plug where a removable core, control key installation, and 90 degree or 180 degree cam rotation options help align cabinet security with the layout of your casework.
Sold In: 1 Each
