Compx National RemovaCore disc tumbler lock plug gives you a keyed core solution for cam lock applications that use a 3/4 inch diameter mounting hole. This plug is part of the RemovaCore disc tumbler system, so it works with separate cylinder assemblies (lock housings) designed for this core. The plug is bright nickel, providing a clean, neutral appearance that suits typical drawer and cabinet hardware layouts. It is keyed to C390A and factory master keyed under code M47054010-390-14A, which ties it into Compx National master key systems flagged as KAMKD or KDMKD. In practical terms, once assembled into a matching cylinder assembly, the RemovaCore master key will operate any compatible pre-assembled disc tumbler from Compx National that is factory master keyed to those systems.
This RemovaCore disc tumbler lock plug works with a cylinder assembly that installs into a 3/4 inch diameter hole, so layout and drilling follow that fixed size across all locations using this system. The key is removable in the locked position only, which means the lock remains under key control whenever it is open and prevents leaving the key in an unlocked cam by habit. The design expects use with cam turn locks that use stop washers to define 90 degree or 90/180 degree rotation, letting the same keyed core participate in different cam swing requirements depending on the door or drawer function.
This Compx National RemovaCore disc tumbler lock plug is intended for cam lock applications on drawers and right-hand or left-hand doors, either lipped, flush, or overlay. That range of door styles lets you carry the same C390A keying across varied cabinet construction without changing the core. When paired with the proper cylinder assembly in a 3/4 inch hole, it supports 90 degree cam turn locks that use a single stop washer, or cam turn locks designed for 90 or 180 degree operation using two stop washers, so the same key system can handle both shorter and longer cam throws in a shop or office run.
The RemovaCore lock plug is factory master keyed as M47054010-390-14A and keyed to C390A, so once it is seated in a compatible disc tumbler housing, the designated RemovaCore master key will open any pre-assembled Compx National disc tumbler lock that is factory master keyed under KAMKD or KDMKD. This ties individual locks into a broader keyed system, simplifying access control for installers setting up banks of cabinets. The key removable in locked position only design further supports consistent field behavior, keeping keys under control and reducing the chance of an unlocked cam being left unattended in busy woodworking or storage environments.
The Compx National RemovaCore disc tumbler lock plug is part of a disc tumbler cam lock system that works with separate cylinder assemblies for drawers and cabinet doors.
The RemovaCore lock plug works with a cylinder assembly that requires a 3/4 inch diameter hole, so all panels using this system follow that boring size.
The plug is keyed to C390A and factory master keyed under M47054010-390-14A, linking it to Compx National KAMKD or KDMKD master key systems.
The RemovaCore plug is used in cam turn locks that use stop washers, allowing 90 degree rotation or 90 and 180 degree options depending on the specific cam lock design.
The RemovaCore disc tumbler lock plug is used on drawers and right-hand or left-hand doors, whether the doors are lipped, flush, or overlay style.
The RemovaCore lock plug allows key removal only in the locked position, so the key stays in place whenever the cam lock is open.
The Compx National RemovaCore disc tumbler lock plug in bright nickel gives you a keyed-to-C390A, factory master keyed core that fits cam lock housings in 3/4 inch holes. For runs of drawers and mixed door styles under a shared KAMKD or KDMKD master key system, this plug ties each cam lock position into the same controlled key hierarchy and supports 90 degree or 90/180 degree cam turn layouts through the matching cylinder assemblies.
Sold In: 1 Each
