Compx National RemovaCore disc tumbler lock plug, bright nickel keyed to C413A/master keyed M47054010-413-14A provides a dedicated core element for cam lock installations where a removable plug and master keying are required. This core plug is part of the Compx National RemovaCore system, so it works within a separate core plug and cylinder assembly to let you set up keyed-alike or master keyed groups around the C413A keying. The bright nickel finish identifies the core visually and matches common cabinet hardware finishes in shop and millwork environments. Because this is a disc tumbler design, it supports Compx National disc tumbler cam lock workflows already using factory master keyed setups.
This core plug works with a separate cylinder assembly that requires a 3/4 inch diameter hole for installation, so casework boring can follow a simple round pattern for the lock body. A control key is required to install core plugs into the cylinder assembly, which lets you handle plug insertion and removal as a keyed maintenance operation rather than a purely mechanical task. The key is removable in the locked position only, so the plug retains the key whenever the lock is open, supporting consistent user behavior at drawers or doors secured by the cam lock assembly.
This Compx National RemovaCore disc tumbler lock plug, bright nickel keyed to C413A/master keyed M47054010-413-14A is intended for cam lock applications on drawers and right-hand or left-hand doors, whether lipped, flush, or overlay, when used with the appropriate cylinder assembly. The related cam turn locks use one stop washer to allow a 90 degree cam turn, or two stop washers to allow either 90 degree or 180 degree cam turns based on application, so the plug participates in setups where the cam rotation is tailored to the cabinet or furniture design. Because RemovaCore locks are factory master keyed, this plug supports installations where multiple drawers or doors need individual keys that still fit a master key over the same disc tumbler system. Once assembled into the lock housing, the master key for the RemovaCore will open any pre-assembled disc tumbler from Compx National that is factory master keyed (KAMKD or KDMKD), allowing this plug to be part of a unified keying system around those lock families.
The separate core plug and cylinder assembly design means the working disc tumbler plug can be handled independently of the housing, so rekeying or reorganizing key groups focuses on swapping or selecting plugs while leaving the main lock hardware in place. The cylinder assembly requires a 3/4 inch diameter hole for installation, creating a standard bore dimension that streamlines drilling patterns across multiple cabinets or doors. The requirement for a control key to install core plugs into the cylinder assembly turns plug installation and removal into a keyed function, which can support controlled access to lock changes in commercial or shop settings. Because the key is removable in the locked position only, users leave the lock positively locked whenever the key is withdrawn, which can reduce partially secured drawers or doors in daily operation. The note that assembled locks such as C8053 cannot be mixed with this product because they are not master keyed identifies this plug as part of a specific master keyed RemovaCore system, keeping keying plans tied to compatible disc tumbler families.
The Compx National RemovaCore disc tumbler lock plug is part of the RemovaCore cam lock system, serving as the removable core element within a separate cylinder assembly for disc tumbler cam locks.
The RemovaCore plug is factory master keyed so that, once assembled, the master key will open any pre-assembled disc tumbler from Compx National that is factory master keyed KAMKD or KDMKD.
The related cylinder assembly for this core plug requires a 3/4 inch diameter hole, which sets the boring dimension for mounting the cam lock housing into drawers or doors.
The RemovaCore disc tumbler plug has the key removable in the locked position only, so the key stays in the plug whenever the cam lock is in the unlocked position.
The core plug installation into the cylinder assembly requires a control key, making plug insertion and removal a keyed operation for controlled lock servicing.
The RemovaCore plug cannot be mixed with assembled locks such as C8053 because those assembled locks are not master keyed, while this plug is part of a master keyed system.
The Compx National RemovaCore disc tumbler lock plug, bright nickel keyed to C413A/master keyed M47054010-413-14A suits projects built around RemovaCore cam lock hardware and factory master keyed disc tumbler systems. When the job calls for a separate core plug and cylinder assembly with a 3/4 inch diameter bore and controlled plug installation using a control key, this plug fits that specification. For drawers and RH or LH doors in lipped, flush, or overlay layouts using compatible Compx National disc tumbler components, this core plug helps organize keying and master key access across the installation.
Sold In: 1 Each
