Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX National Removacore unassembled cam lock is a cam lock system with a 1-3/16 inch cylinder and bright nickel finish, providing a keyed locking point in cabinet and furniture applications where a rotary cam is needed to secure a panel or drawer. The lock is designed to use a 3/4 inch diameter hole for installation, so it fits standard cam-lock boring commonly used in woodworking and casework. This Removacore lock is factory master keyed, so it works within a controlled key system where a master key can service multiple locks on a project. Once assembled, the Removacore masterkey opens any pre-assembled disc tumbler from CompX National that is factory master keyed under KAMKD or KDMKD, tying this lock into existing master-keyed layouts. The product is intended for drawers and right-hand or left-hand doors, whether lipped, flush, or overlay, supporting a range of cabinet construction styles.
This CompX National Removacore cam lock requires a 3/4 inch diameter hole for installation, so boring can be planned in advance on doors or drawers using standard 3/4 inch tooling. The design uses a separate core plug and cylinder assembly, which means the housing can be mounted in the prepared hole and secured, and then the core plug can be installed into the cylinder assembly afterward. The key is removable in the locked position only, so during installation and setup, the key remains in place in the unlocked position, helping maintain control of the lock orientation until the cam is positioned as required.
This CompX National Removacore unassembled cam lock is specified for drawers and right-hand or left-hand doors, whether lipped, flush, or overlay, so it works across common cabinet door constructions found in shops and commercial casework. The lock uses cams with a straight 1-1/2 inch extension and a formed 1-1/8 inch extension with 11/32 inch offset, giving options for reaching behind the lock stile or into different panel depths during layout. The 3/4 inch diameter hole requirement keeps boring consistent across multiple cabinets, simplifying machining programs or jig setups for repetitive runs. Because the lock is factory master keyed as part of the Removacore system, it fits projects where multiple openings need individual keys while still being served by a master key under KAMKD or KDMKD factory master keying. Once assembled, the masterkey opens any pre-assembled disc tumbler from CompX National that is factory master keyed in those systems, helping standardize key control on multi-unit installations across a facility.
The 90 degree cam turn feature uses a stop washer so the cam turns through a controlled quarter turn, producing a simple locked-unlocked motion that reduces confusion for users at the door or drawer. For applications needing more rotation, the 90 degree and 180 degree cam turn locks use two stop washers, allowing the installer to choose a 90 degree or 180 degree travel, which helps match the cam swing to strike placement or panel geometry. Key removable in locked position only means the key stays in the cylinder while the lock is open, which helps keep doors from being left unlocked when the user walks away. The lock housing is supplied with a trim washer and spur washer for wood, plus mounting nuts, supporting a secure mounting into wood-based cabinet materials where pull and torque loads act on the cylinder. Two cams are part of the configuration, one straight with 1-1/2 inch extension and one formed with 1-1/8 inch extension and 11/32 inch offset, helping tune the reach and offset so the cam meets the frame or catch in the right contact point. This Removacore cylinder cannot be mixed with assembled locks such as C8053, because those are not in the same master keyed system, so projects using this product maintain a consistent master-keyed structure.
The M47054010-KD-14A is a CompX National Removacore unassembled cam lock with a 1-3/16 inch cylinder and bright nickel finish, used to provide keyed cam locking on cabinet drawers and doors.
This Removacore cam lock requires a 3/4 inch diameter hole for installation, so boring operations can be planned around a single standard hole size across doors or drawers.
The cam turn locks use one or two stop washers to limit rotation to either 90 degrees or 180 degrees, so the installer can match cam travel to the door, drawer, and strike layout.
This lock is intended for drawers and right-hand or left-hand doors, whether lipped, flush, or overlay, covering most common cabinet construction styles in woodworking projects.
The Removacore lock is factory master keyed, so once assembled its masterkey opens any pre-assembled disc tumbler from CompX National that is factory master keyed under KAMKD or KDMKD.
This product cannot be mixed with assembled locks such as C8053 because those are not master keyed the same way, so they do not share the same Removacore master key system.
This CompX National Removacore unassembled cam lock with 1-3/16 inch cylinder and bright nickel finish provides a master-key-capable cam locking point for drawers and right-hand or left-hand doors. With a 3/4 inch diameter hole requirement and cams offering 1-1/2 inch straight extension or 1-1/8 inch formed extension with 11/32 inch offset, it supports flexible engagement with frames and strikes. The separate core plug and cylinder assembly configuration supports controlled keying based on the Removacore factory master keyed system, allowing it to align with KAMKD or KDMKD keyed layouts on cabinets and casework.
Sold In: 1 Each
