Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Compx National RemovaCore disc tumbler lock plug gives you a keyed-to-C415A core in a bright nickel finish, so you can build out matching cam lock points wherever the master keyed RemovaCore system is used. This core plug is part of the CompX National cam lock line, classified under locks and latches as a cam lock, and works with the separate cylinder assembly to create a complete lock housing. The plug is factory master keyed under the RemovaCore system, so once it is assembled into the proper cylinder, the masterkey for the RemovaCore will open any pre-assembled disc tumbler from Compx National that is factory master keyed under KAMKD or KDMKD. The core requires a 3/4 inch diameter hole in the mounting surface, which sets the boring step for casework, drawer fronts, or door stiles.
This Compx National RemovaCore disc tumbler lock plug installs into a separate cylinder assembly that functions as the lock housing, so the workflow starts with boring a 3/4 inch diameter hole through the mounting panel. That 3/4 inch requirement sets your drill or bit selection and ensures the housing can seat properly in wood or other material. The plug uses a control key to install into the cylinder assembly, which means core installation and change-out rely on that specific control key rather than disassembling the housing. Once this core plug and the matching cylinder assembly are in place, the housing uses cams with specified extensions and offset, so the core position directly influences how the cam engages the drawer or door frame.
The RemovaCore disc tumbler lock plug is described for use with 90 degree cam turn locks that are supplied with one stop washer, and with 90 degree and 180 degree cam turn locks that are supplied with two stop washers. Those stop washer options let the cam turn either 90 degrees or 180 degrees based on the application, so this core plug supports both quarter-turn and half-turn locking motions once assembled into the correct cylinder and cam combination. The cam lock series is noted for drawers and for right-hand or left-hand doors that may be lipped, flush, or overlay, so the same core and housing approach can be applied across different cabinet construction styles. The housing in this system is specified with a trim washer, spur washer for wood, mounting nuts, and two cams with defined extensions and an 11/32 inch offset, so the core plug positions and drives those cams in a predictable way when you turn the key. Because the plug is keyed to C415A, each of those drawers or doors can share the same user key while still being part of the broader master keyed RemovaCore plan.
RemovaCore locks are factory master keyed, and this core plug follows that system, so once the plug is assembled into the proper cylinder housing the RemovaCore master key will open any pre-assembled disc tumbler from Compx National that is factory master keyed under KAMKD or KDMKD. That factory master keying eliminates field pinning of these specific disc tumbler cores and gives a predictable relationship between user keys and the master key. The plug is separate from the cylinder assembly, which means you can plan jobs where housings are installed into the casework while cores keyed to C415A are managed by keying level. The note that assembled locks such as C8053 cannot be mixed with this product because they are not master keyed sets a clear boundary for which locks participate in the RemovaCore master system, helping keep key hierarchies consistent.
The Compx National M47054010-415-14A is a RemovaCore disc tumbler lock plug used with cam locks, so it forms the keyed core that operates the cam inside a matching cylinder housing.
The RemovaCore disc tumbler lock plug requires a 3/4 inch diameter hole for installation, which sets the boring size for the lock housing in drawers or cabinet doors.
This Compx National RemovaCore disc tumbler lock plug is keyed to C415A, providing a defined key code so matching locks can share the same user key across multiple locations.
The RemovaCore disc tumbler lock plug is factory master keyed, so once assembled into the proper cylinder, the RemovaCore master key operates compatible factory master keyed locks.
The Compx National RemovaCore disc tumbler lock plug is specified for drawers and for right-hand or left-hand doors that may be lipped, flush, or overlay in cam lock applications.
This RemovaCore disc tumbler lock plug cannot be mixed with assembled locks such as C8053, because those assembled locks are not master keyed under the RemovaCore system.
The Compx National RemovaCore disc tumbler lock plug in bright nickel, keyed to C415A and factory master keyed, fits jobs where a 3/4 inch cam lock bore and RemovaCore master key control are already part of the layout. Using this separate core plug with the matching cylinder assembly lets you build out drawers and right-hand or left-hand lipped, flush, or overlay doors on the same C415A user key while tying them into the Compx National RemovaCore master keyed structure. For projects using factory master keyed disc tumbler cam locks under KAMKD or KDMKD, this plug aligns the keying with the established RemovaCore system.
Sold In: 1 Each
