Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
maple wood backsplash 4 x 18 describes a John Boos and Company butcher block backsplash that is 4 inches high, 18 inches long, and 3/4 inch thick, so it finishes off short runs of countertop where a full-length piece is not required. The backsplash is made from Northern Hard Maple hardwood, giving a solid wood edge that matches John Boos butcher block tops in material and appearance for a consistent installation line. The maple is kiln dried for low moisture content, which supports dimensional stability in normal shop and kitchen environments. The strips are electrostatically glued with a moisture resistant urea resin adhesive, so the jointed construction maintains integrity where splashes and routine cleaning occur. The surface has been finished with mineral oil, which seals the wood fibers and brings out the warm, rich grain color to visually match mineral-oiled John Boos countertops.
This hard maple backsplash is sized to work with countertops that are 1-1/2 inches thick and 25 inches deep, so it complements the depth and profile of those butcher block tops where they meet the wall. The 4 inch high by 3/4 inch thick profile creates a vertical plane at the rear of the work surface, giving installers a consistent reference when aligning the countertop against an existing wall. The kiln dried, low-moisture Northern Hard Maple construction supports stable dimensions during fitting, which helps maintain tight joints at corners or between sections. Because the backsplash and tops share mineral oil finishing, the transition from horizontal surface to rear edge reads as one continuous butcher block assembly after installation.
This John Boos butcher block backsplash is designed to work with maple butcher block countertops in the Wood Countertops category, making it a match for installations that use Northern Hard Maple tops in kitchen, shop, or workroom settings. The 18 inch length pairs well with shorter counter sections, such as ends of runs or spaces between fixed obstacles, so layout planning can use this piece where a full-length backsplash is not practical. With a 4 inch height and 3/4 inch thickness, the backsplash aligns with the specified backsplash size for countertops that are 1-1/2 inches thick and 25 inches deep, giving the rear edge a scaled proportion relative to the work surface. The mineral oil finish visually connects to John Boos butcher block tops finished the same way, helping the back edge read as part of the same maple surface.
The use of kiln dried Northern Hard Maple with low moisture content provides a starting point for stable dimensions, which supports repeatable joints when cutting and fitting multiple backsplash sections in a run. Electrostatic gluing with a moisture resistant urea resin adhesive builds strength into the butcher block construction, so the laminated maple segments work together as one solid piece where cleaning splashes and routine use occur. The 4 inch high by 18 inch long by 3/4 inch thick sizing is fixed, allowing installers to plan cuts and joints around known stock dimensions for predictable layout. The mineral oil finish that seals the wood fibers also brings out consistent warm, rich color in the maple grain, helping separate sections of backsplash and countertop appear uniform when installed side by side.
The RS18-O backsplash uses Northern Hard Maple hardwood, so it matches John Boos maple butcher block countertops in species and gives a solid wood rear edge in the same material.
The backsplash is 4 inches high, 18 inches long, and 3/4 inch thick, which suits shorter sections of wall and produces a defined vertical edge at the back of the countertop.
The backsplash is electrostatically glued using a moisture resistant urea resin adhesive, helping the butcher block segments act as one piece where splashes and cleaning are common.
The backsplash is finished with mineral oil, which seals the wood fibers and brings out the warm, rich colors of the Northern Hard Maple grain for a uniform appearance.
This backsplash is part of the John Boos butcher block line, using Northern Hard Maple and mineral oil finishing to align with countertops that are 1-1/2 inches thick and 25 inches deep.
The Northern Hard Maple is kiln dried for low moisture content, supporting dimensional stability so the backsplash maintains its size relationship to the countertop over time.
The John Boos and Company RS18-O backsplash in Northern Hard Maple provides a 4 inch high, 18 inch long, 3/4 inch thick element that aligns with mineral-oiled butcher block countertops that are 1-1/2 inches thick and 25 inches deep. The kiln dried, moisture resistant, electrostatically glued construction supports a stable, unified rear edge where countertops meet the wall. When a short run or specific span calls for a defined maple back edge that visually ties into John Boos butcher block tops, this hard maple backsplash offers a purpose-built option sized for that role.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CTMYS Mfr# MYSB | Mystery Oil For Wood Surfaces 16 oz |