Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
John Boos butcher block backsplash gives a finished edge transition where a butcher block countertop meets a wall over a long run. This hard maple 4 inch high piece helps visually tie the top into the wall line and defines the working depth of the counter. The 108 inch length suits long installations in kitchens or work areas needing a continuous maple edge. The 3/4 inch thickness provides a substantial wood face that visually matches typical butcher block construction. Being part of the John Boos butcher block line, this backsplash is designed to coordinate with their Northern hard maple countertops, so the color and grain character work together across the installation. Professional shops and serious DIY users can use this sized piece to finish a long straight run without breaking the visual line.
This hard maple backsplash is sized to work alongside John Boos countertops that are 1-1/2 inches thick and 25 inches deep. The 4 inch height lines up visually above the 25 inch depth, creating a proportioned back edge along the wall side of the counter. The 3/4 inch thickness contrasts with the 1-1/2 inch thick tops, giving a clear separation between working surface and vertical return. Because both parts use Northern hard maple hardwood, the joint where the countertop meets the backsplash can present a unified look once aligned and finished. Installers can plan wall and cabinet layouts knowing this backsplash dimension is intended to coordinate with those standard John Boos maple tops.
The RS108-O backsplash is intended for use with John Boos maple butcher block countertops in the wood countertops category. At 108 inches long, it suits extended counter runs where a continuous maple back edge is required along a wall. The 4 inch height helps cover the joint where the 25 inch deep countertop meets the wall plane, so it fits well behind work surfaces in kitchens, prep areas, or woodworking shop benches built around butcher block. Because it is constructed from Northern hard maple hardwood, this piece fits visually in projects where that same species is already used for tops, creating a unified installation across the work area.
John Boos butcher block tops are constructed of high quality Northern hard maple hardwood, kiln dried for low moisture content and electrostatically glued with moisture resistant urea resin adhesive, and this backsplash is part of that same butcher block line. Kiln drying for low moisture content stabilizes the wood as it acclimates in typical indoor environments, which matters when aligning a long 108 inch backsplash against a wall. The moisture resistant urea resin adhesive supports the laminated butcher block construction, so the bonded segments work as a single unit across the full length. Tops have been finished with mineral oil to seal the wood fibers and to bring out the warm rich colors of the grain, and the backsplash shares that oil finished appearance for a consistent look. Tops can be retreated with mineral oil as needed, which allows ongoing maintenance of the wood surface appearance across both countertop and backsplash. This consistent construction approach helps installers and fabricators create a continuous, coordinated butcher block assembly from horizontal top to vertical back edge.
The RS108-O backsplash is 4 inches high, 108 inches long, and 3/4 inch thick, which sets its visible face size and how it aligns along the back of a butcher block countertop run.
This backsplash uses Northern hard maple hardwood, so its grain and color coordinate with John Boos maple butcher block countertops in matching installations.
The maple countertops are 1-1/2 inches thick and 25 inches deep, while the backsplash is 4 inches high and 3/4 inch thick, so the pieces align to form a defined back edge.
The mineral oil finish seals the wood fibers and brings out the warm rich colors of the maple grain, giving the backsplash a finished butcher block appearance.
John Boos butcher block components are electrostatically glued with moisture resistant urea resin adhesive, so the laminated maple segments act as a single piece across the length.
John Boos tops can be retreated with mineral oil as needed, so the backsplash surface appearance can be maintained with the same type of oil treatment.
The John Boos and Company RS108-O hard maple backsplash serves projects needing a 4 inch high, 108 inch long, 3/4 inch thick vertical return along butcher block countertops. Its Northern hard maple construction, mineral oil finish, and matching proportions to 1-1/2 inch thick, 25 inch deep John Boos tops make it a practical choice when a unified butcher block surface and back edge are required. For long wall-side runs built around John Boos maple butcher block, this backsplash provides the sized component to complete the installation visually.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CTMYS Mfr# MYSB | Mystery Oil For Wood Surfaces 16 oz |