John Boos Butcherblock Backsplash 4"H x 144"L x 3/4"T Hard Maple, RS144-O

John Boos Maple Backsplash For Counter Runs

John Boos butcher block backsplash gives a 4 inch high hard maple edge that finishes the back of a countertop run and protects the wall from everyday contact. Constructed of Northern Hard Maple hardwood, it uses a dense kitchen-grade species that holds up well as a working surface edge. The backsplash length of 144 inches spans long counters in a single run, which helps keep visual lines clean along the wall. Its 3/4 inch thickness creates a substantial wood band that aligns well with typical butcher block build ups. Kiln dried construction keeps the maple at a low moisture content, which supports dimensional stability once installed in a shop or kitchen environment. An unfinished core sealed with mineral oil on the surface lets the wood fibers stay protected while keeping the natural grain character visible.

Key Maple Backsplash Details For Woodworkers

• The backsplash is constructed of Northern Hard Maple hardwood, providing a solid wood component that matches hard maple butcher block installations for a consistent look across the run.
• Its 4 inch height creates a defined vertical transition at the back of the countertop, helping cover the joint between counter and wall while presenting a continuous maple face.
• The 144 inch length allows one-piece installation along extended counters, which reduces field joints in the backsplash and supports a cleaner visual line.
• A 3/4 inch thickness gives the backsplash a substantial profile, helping it integrate with standard butcher block thicknesses and edge details in typical shop layouts.
• The backsplash is electrostatically glued with moisture resistant urea resin adhesive, creating strong internal bonds that support long-term joint integrity under normal room humidity changes.
• Use of moisture resistant adhesive within the maple construction helps the butcher block structure resist glue-line failure when exposed to routine cleaning and ambient moisture.

Installation Fit For Maple Butcher Block Runs

This hard maple backsplash measures 144 inches long, 4 inches high, and 3/4 inch thick, so it aligns naturally with full-length butcher block counters using the same footprint. Kiln dried Northern Hard Maple hardwood keeps the board stable as it is fastened along the back edge, helping limit movement against the wall surface under normal conditions. The moisture resistant urea resin adhesive inside the butcher block construction supports solid glue lines when the backsplash is secured to a substrate or counter edge. Because the backsplash has been finished with mineral oil to seal the wood fibers, the surface arrives ready for integration with other oiled butcher block components in the same project.

How This RS144-O Backsplash Works In Projects

Maple Backsplash Use Along Countertops

This John Boos butcher block backsplash in Northern Hard Maple hardwood is designed to run along the back of wood countertop installations where a solid maple upstand is required. The 4 inch height sets a consistent boundary between work surface and wall, which suits kitchens, workrooms, or shop benches using butcher block layouts. With a length of 144 inches, one piece can follow a long counter without intermediate seams, which supports uninterrupted grain flow and a simple alignment process along the wall line. At 3/4 inch thick, the backsplash matches common butcher block edge profiles, so fabricators can tie it into adjacent hard maple components without awkward step transitions or unusual milling.

The kiln dried construction with low moisture content keeps movement more predictable as the backsplash is fastened behind the work surface, which helps maintain a tight joint at the counter-to-wall intersection over time. Electrostatic application of the moisture resistant urea resin adhesive creates durable internal glue lines, so the butcher block structure stays cohesive under normal household or shop humidity swings. The mineral oil finish on the backsplash seals the wood fibers at the surface, which supports routine wipe-downs and helps highlight the warm, rich colors of the maple grain. That oil finish also means the backsplash visually coordinates with other mineral oil-treated butcher block elements, simplifying material selection for a unified project.

Common Questions About This Maple Backsplash

Select This RS144-O For Long Maple Runs

Choose the John Boos butcher block backsplash RS144-O when a 4 inch high, 144 inch long Northern Hard Maple hardwood upstand is required behind a wood countertop. Its kiln dried construction, moisture resistant urea resin adhesive, and mineral oil finish provide a coordinated hard maple solution for butcher block projects sold by Wurth Baer Supply.