John Boos Butcherblock Backsplash 4"H x 24"L x 3/4"T Hard Maple, RS24-O

John Boos Butcher Block Backsplash For Maple Tops

John Boos butcher block backsplash gives you a 4 inch high hard maple edge that stops splashes at the back of a countertop run, so water and debris are controlled along the wall line. This maple wood backsplash 4 x 24 is built from Northern Hard Maple hardwood, so it matches John Boos butcher block tops in both material and appearance for a unified installation. The hardwood is kiln dried for low moisture content, which supports dimensional stability once the backsplash is fixed along a wall. An electrostatically glued construction with moisture resistant urea resin adhesive keeps the butcher block structure bonded under typical kitchen or shop humidity. The mineral oil finish seals the wood fibers and highlights the warm rich grain, so the backsplash visually ties into oiled John Boos countertops while arriving ready for service.

Key Maple Backsplash Details That Support Use

• The 4 inch high design provides vertical coverage behind a countertop run, helping contain routine splashes against the wall for a cleaner transition line.
• The 24 inch length aligns with short runs or segments of longer counters, simplifying layout where a standard 2 foot section solves a specific span.
• The 3/4 inch thick profile keeps the backsplash slim while still giving solid hard maple material for a sturdy edge at the rear of the top.
• Northern Hard Maple hardwood construction matches John Boos butcher block tops in species, supporting a consistent look where top and backsplash meet.
• The mineral oil finish seals the wood fibers and brings out the warm rich grain, so the backsplash visually blends with other oiled butcher block surfaces.
• The moisture resistant urea resin adhesive used in the electrostatically glued construction helps the butcher block segments stay bonded in normal kitchen humidity.

Backsplash Fit And Alignment With Butcher Block Tops

This hard maple butcher block backsplash is specified at 4 inches high and 3/4 inch thick, so installers know the exact rear wall rise and edge mass when planning a run. At 24 inches long, the RS24-O format fits common 2 foot counter spans or can be combined with other lengths from the same John Boos line for longer walls. The kiln dried, low moisture Northern Hard Maple stock helps reduce seasonal movement once secured behind a 1-1/2 inch thick, 25 inch deep countertop. Because the backsplash uses the same butcher block class material and mineral oil finish as John Boos tops, the joint between horizontal surface and vertical rise presents a continuous maple field.

How This RS24-O Backsplash Works In Real Jobs

Using The 4 x 24 Backsplash Along Counter Runs

The RS24-O butcher block backsplash is sized specifically at 4 inches high by 24 inches long by 3/4 inch thick, giving a defined section for finishing the rear of a short countertop span. When paired with a 25 inch deep John Boos butcher block top, the 4 inch rise creates a clear upstand at the wall that visually caps the surface. The hard maple butcher block construction lets this 4 inch high maple backsplash carry the same grain character and coloration as the top, so the wall transition does not look like a separate material. In applications where a 2 foot run abuts a wall, this format lets installers plan the rear finish using a single matched piece rather than cutting down unrelated stock.

Details That Support Stable, Repeatable Installations

The Northern Hard Maple hardwood used in this backsplash is kiln dried for low moisture content, which helps the 3/4 inch thick strip stay dimensionally consistent when fastened to a wall behind a butcher block top. Electrostatic gluing with moisture resistant urea resin adhesive locks the individual maple segments into a stable butcher block, supporting long-term bond integrity in normal interior humidity. The mineral oil finish on the backsplash matches the mineral oil treatment on John Boos butcher block tops, so the seam where the vertical and horizontal surfaces meet reads as one continuous, oiled maple field. Because the countertops in this line are 1-1/2 inches thick and 25 inches deep, installers know that this hard maple butcher block backsplash is engineered as part of a coordinated system for finishing the rear edge.

Common Questions About This Maple Backsplash

Selecting This John Boos Backsplash For Your Run

John Boos butcher block backsplash in the RS24-O size gives installers a defined 4 inch high, 24 inch long hard maple piece that is engineered to coordinate with John Boos butcher block tops. The kiln dried Northern Hard Maple hardwood, moisture resistant urea resin adhesive, and mineral oil finish align this strip with the described countertop line, so wall transitions can be planned as part of a single maple system. For projects built around John Boos hard maple butcher block, this 3/4 inch thick, oiled backsplash format provides a practical rear-edge solution.