Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
John Boos butcher block backsplash gives a 4 inch high Northern Hard Maple edge that matches John Boos butcher block tops, so the rear of the countertop can be finished in the same material and visual grain. This backsplash is 42 inches long, which fits runs designed around that length and lets installers plan seams and terminations with a known measurement. The 3/4 inch thick construction provides a solid maple section that aligns with typical backsplash proportions and supports a stable glue surface against a properly prepared wall. Kiln dried hard maple in this backsplash has low moisture content, which supports dimensional stability in normal interior conditions where countertops see daily temperature and humidity changes. Moisture resistant urea resin adhesive is used in the butcher block construction, giving the laminated maple core resistance to joint creep in normal kitchen or workroom environments.
This maple backsplash is 4 inches high and 3/4 inch thick, so installers can size wall clearances and edge details around those fixed dimensions when laying out a butcher block run. The 42 inch length helps with measuring wall conditions, locating any joints, and deciding where to trim ends to meet adjacent surfaces. Tops and related pieces are finished with mineral oil, which seals the wood fibers and supports an oil-maintained surface that can be retreated with mineral oil as needed using Boos Mystery Oil. Using a backsplash with the same mineral oil finish as the top allows the installer or shop to treat both surfaces in the same cycle, so color and sheen develop together over time.
John Boos butcher block backsplash in Northern Hard Maple suits installations using John Boos butcher block tops, because both pieces share the same hardwood species and construction approach. The backsplash height of 4 inches gives a practical upstand for countertops 25 inches deep, pairing with the depth of the tops described for these butcher block counters. At 42 inches long, this RS42-O model works in layouts where cabinet or counter sections are around that span, so the backsplash can run cleanly along the wall with minimal cutting. The 3/4 inch thickness delivers a solid maple profile that visually aligns with 1-1/2 inch thick countertops when viewed together from the front and side, supporting a balanced proportion between top and rear edge.
The kiln dried Northern Hard Maple used in these butcher block components holds a low moisture content, which helps maintain joint tightness between laminations and supports straightness of the backsplash over its 42 inch length. Moisture resistant urea resin adhesive bonds the maple strips, so the butcher block structure of the backsplash stays cohesive under normal indoor humidity where countertops are installed. The mineral oil finish on the backsplash seals the wood fibers and brings out warm, rich grain color, aligning with the finish on the coordinating tops for a continuous appearance. Because tops can be retreated with mineral oil as needed using Boos Mystery Oil, the backsplash surface can follow the same retreatment routine, keeping the color and luster matched along the entire counter and wall intersection.
The John Boos butcher block backsplash RS42-O is 4 inches high, 42 inches long, and 3/4 inch thick, so layouts and wall clearances can be planned precisely around those measurements.
This backsplash uses high quality Northern Hard Maple hardwood, giving a dense, uniform surface that visually coordinates with matching maple butcher block countertops.
The backsplash is made from kiln dried Northern Hard Maple with low moisture content and is electrostatically glued using moisture resistant urea resin adhesive for stable butcher block construction.
The John Boos butcher block backsplash is finished with mineral oil, which seals the wood fibers and highlights the warm, rich colors of the maple grain.
The maple butcher block components are finished with mineral oil and can be retreated with mineral oil as needed using Boos Mystery Oil to maintain appearance.
This RS42-O backsplash is part of the John Boos butcher block line using Northern Hard Maple, sized to work with 25 inch deep, 1-1/2 inch thick countertops for a coordinated installation.
John Boos butcher block backsplash in model RS42-O gives a 4 inch high, 42 inch long, 3/4 inch thick Northern Hard Maple section that aligns with mineral oil finished John Boos butcher block tops. Using this matching backsplash lets fabricators and installers carry the same species, construction, and oil finish from countertop surface to rear wall edge, supporting a unified look on wood countertop projects.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CTMYS Mfr# MYSB | Mystery Oil For Wood Surfaces 16 oz |