John Boos Butcherblock Backsplash 4"H x 48"L x 3/4"T Hard Maple, RS48-O

John Boos Butcher Block Backsplash For Maple Tops

John Boos butcher block backsplash gives you a 4 inch high northern hard maple upright edge that helps visually finish a butcher block run and define the back of the countertop. The RS48-O size at 48 inches long and 3/4 inch thick provides a straight, substantial maple strip that pairs with butcher block tops in typical counter spans. Construction from high quality northern hard maple hardwood creates a dense, stable piece that supports a consistent line along the back of the work surface. Kiln drying for low moisture content limits seasonal movement, which supports tighter seams where the backsplash meets the top. Electrostatic application of moisture resistant urea resin adhesive during butcher block construction produces a solid bond in the assembled maple, which helps the backsplash work as a dependable extension of the top in day-to-day use.

Key Maple Backsplash Details That Support Work

• The 4 inch high backsplash dimension creates a defined vertical edge that helps contain splashes against the wall, which supports a cleaner transition between the butcher block surface and adjacent finishes.
• The 48 inch length works with many standard butcher block runs, so installers can span common cabinet sections with a single maple piece, reducing joints that would otherwise require additional alignment time.
• The 3/4 inch thickness delivers a substantial maple profile that matches the butcher block character, which helps the backsplash read as part of the top rather than a thin trim strip.
• Construction from northern hard maple hardwood provides a dense edge surface that handles regular contact along the back of the counter, supporting a consistent appearance in typical kitchen or workroom environments.
• Mineral oil finish seals the wood fibers and brings out the warm grain color, which allows the backsplash to visually match oiled butcher block tops in the same installation.

Maple Backsplash Fit With Butcher Block Tops

The RS48-O backsplash is specified for butcher block installations using John Boos northern hard maple tops, so the material and finish align across the run. Countertops in this product family are 1-1/2 inches thick and 25 inches deep, which defines the typical horizontal surface the backsplash is paired with. With a 4 inch high and 3/4 inch thick profile, the maple strip sits comfortably at the back edge of these tops, creating a proportion that looks balanced against the 1-1/2 inch thickness. The mineral oil finish used on the tops is also used on the backsplash, so the color tone and sheen track together from horizontal to vertical surfaces when installed in the same project.

Using This Hard Maple Backsplash In Projects

Where This John Boos Backsplash Works Best

This John Boos butcher block backsplash is designed for projects that already use the brand's northern hard maple butcher block tops, so the RS48-O piece continues the same material and appearance up the wall. The 48 inch long format suits many straight countertop sections common in kitchens and workrooms, allowing installers to run the backsplash along a full base cabinet span. The 4 inch height provides a visible maple band that matches the butcher block style while still leaving sufficient wall area above for tile or paint. With a 3/4 inch thick profile, the backsplash has enough material to align well with the 1-1/2 inch thick tops it is intended to accompany, helping the overall assembly read as a single, coordinated butcher block system.

Why The Mineral Oil Maple Construction Matters

The northern hard maple hardwood specified for John Boos butcher block tops and backsplashes supplies a dense, fine-grained surface that supports a uniform look across joints, which is important when aligning a backsplash to the top. Kiln drying to a low moisture content stabilizes the maple, so the RS48-O piece responds more predictably as room humidity changes, helping maintain a clean line where it meets the wall and countertop. Moisture resistant urea resin adhesive used in the butcher block construction creates a durable glue line inside the assembled maple, supporting long-term integrity of the piece under normal indoor use. The mineral oil finish used to seal the wood fibers also enhances the warm, rich colors of the grain, so when the backsplash sits behind an oiled butcher block top the transition from horizontal to vertical maple presents as one continuous surface.

Common Questions About This Maple Backsplash

Selecting This RS48-O Maple Backsplash For Your Run

The RS48-O John Boos butcher block backsplash offers a 4 inch high, 48 inch long, 3/4 inch thick northern hard maple strip that matches their mineral oil finished tops. For projects using John Boos maple butcher block countertops, this piece provides the corresponding upright maple edge so the back of the run carries the same material, thickness relationship, and oiled grain character as the work surface itself.