John Boos Butcherblock Backsplash 4"H x 72"L x 3/4"T Hard Maple, RS72-O

John Boos Butcherblock Backsplash For Maple Tops

John Boos butcherblock backsplash gives a finished 4 inch high edge along a counter run using kiln dried Northern Hard Maple. The 72 inch length and 3/4 inch thickness let this piece finish a long straight run so the wall transition looks consistent and professional.

The backsplash is constructed of high quality Northern Hard Maple hardwood, so the exposed grain matches John Boos butcher block work surfaces using the same species. That consistent species match keeps tone and texture aligned along the back edge of a counter, which matters on visible walls and open-plan layouts.

The maple has been finished with mineral oil to seal the wood fibers and bring out the warm rich colors of the grain. This oil finish supports the natural butcherblock appearance while providing a work-friendly surface that visually ties into mineral-oiled tops in food prep or utility areas.

Electrostatic gluing with moisture resistant urea resin adhesive bonds the maple strips into a cohesive backsplash section. That construction method keeps the piece stable as one unit during installation and helps the joint lines stay tight in day-to-day service near sinks or humid spaces along a backsplash line.

Backsplash Details That Support Finished Runs

• The 4 inch height sets a standard backsplash band along the wall, which simplifies layout across multiple cabinet bays and keeps the top-to-wall transition at a consistent visual line.
• The 72 inch length covers a long stretch of counter, which reduces the number of joints along the back wall and helps the installer maintain a clean, continuous grain appearance.
• The 3/4 inch thickness aligns with typical butcher block edge build, which allows the installer to mate this piece to matching tops in a stable, flush plane along the back edge.
• Construction from high quality Northern Hard Maple hardwood gives a dense, fine-grained surface that pairs visually with hard maple countertops in both residential and commercial millwork.
• Mineral oil finishing seals the wood fibers and brings out the warm rich colors of the grain, which keeps the backsplash visually integrated with other mineral oil treated John Boos work surfaces.
• The use of moisture resistant urea resin adhesive in electrostatic gluing helps the laminated backsplash resist glue-line issues in normal moisture variation near walls, sinks, and splash zones.

Maple Backsplash Fit Along Countertop Runs

This 4 inch high Northern Hard Maple backsplash is sized to sit along the rear edge of a butcher block or wood countertop as a vertical upstand. The 72 inch length works well for spanning a typical long base cabinet run without interruption, which streamlines layout on full-size wall sections.

The 3/4 inch thickness lets the backsplash align naturally with many butcher block build ups that share the same material thickness, so the top and back edge can meet cleanly. Because the maple is kiln dried for low moisture content, the stock starts out dimensionally controlled for fitting against finished walls and straight counters.

The mineral oil finish is already applied, so the wood fibers are sealed when the backsplash is placed against the wall and counter surfaces. This provides a ready-to-use surface tone that coordinates with mineral oil treated John Boos butcher block components in the same project.

Using The RS72-O Backsplash In Millwork Projects

Where This Hard Maple Backsplash Fits Best

The RS72-O backsplash is part of the John Boos butcher block product class, built for use wherever Northern Hard Maple countertops or work surfaces need a rear upstand. The 4 inch height suits many kitchen, prep room, and workbench layouts that call for a modest but visible backsplash band.

As a 72 inch long hard maple piece, it fits runs that follow typical base cabinet groupings and long spans in wood countertop installations. The kiln dried construction with low moisture content means the stock starts stable for wall-to-top junctions in interior woodworking environments.

The mineral oil finished surface lets the backsplash visually tie into other mineral oil treated John Boos butcher block elements by matching the warm rich colors of the grain. That makes this part useful on projects where a continuous butcherblock appearance is required from counter surface to wall edge.

Because the backsplash uses moisture resistant urea resin adhesive in electrostatic gluing, it holds together as a laminated solid section behind working surfaces. This construction design supports use in areas where splashes or humidity may be present along the wall line above a wood countertop.

Details That Support Consistent Results And Finish

The high quality Northern Hard Maple hardwood base gives a strong, fine-grained substrate that works well alongside matching maple block tops. That material pairing keeps sanding, edge easing, and finishing behavior consistent across all butcher block components on the same run.

Electrostatic gluing with moisture resistant urea resin adhesive creates uniform bond lines through the backsplash, which supports straight, predictable trimming and shaping operations along the length. Installers handle one cohesive component rather than dealing with weak glue joints during fitting.

The mineral oil finish that seals the wood fibers also brings out the warm rich colors of the grain, so the backsplash arrives with an established tone that matches other mineral-oiled John Boos products. Backsplashes can be retreated with mineral oil as needed, which helps maintain a consistent look over time.

The combination of kiln dried low moisture content maple and moisture resistant adhesive creates a backsplash part designed to perform as part of the broader John Boos butcher block system. That integrated design supports repeatable outcomes when the same material, finish, and construction characteristics are used across tops and backsplashes in a single installation.

Key Questions About This Maple Backsplash

Select This Backsplash For Matching Maple Runs

The John Boos butcherblock backsplash in kiln dried Northern Hard Maple gives a 4 inch high, 72 inch long, 3/4 inch thick upstand that aligns with hard maple countertops. The mineral oil finish and moisture resistant urea resin adhesive construction keep appearance and performance tied to the broader John Boos butcher block system.

For projects built around Northern Hard Maple butcher block, this RS72-O backsplash supplies the matching rear edge component so the counter-to-wall transition follows the same species, construction, and mineral oil finish across the entire run.