Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
John Boos butcher block backsplash gives a finished 4 inch high edge at the back of a hard maple countertop run, so the work surface visually ties together as one butcher block assembly. This backsplash is made from Northern Hard Maple hardwood, so it matches the John Boos butcher block tops built from the same material. The kiln dried maple has low moisture content, which helps the backsplash move in a more controlled way with normal indoor humidity changes over time. It is electrostatically glued with a moisture resistant urea resin adhesive, creating a stable butcher block structure along the full 30 inch length. The mineral oil finish seals the wood fibers to limit surface absorption and brings out the warm, rich grain color, so the backsplash reads the same as the countertop during installation and in daily use.
This butcher block backsplash is 4 inches high, which pairs with countertops that are 25 inches deep by adding a defined vertical rise at the back edge. The 30 inch length suits shorter runs or segments of a larger John Boos layout, so the installer can use it where a 30 inch span is needed. At 3/4 inch thick, the maple body aligns well with typical wall clearances and trim build-outs while still reading as a substantial butcher block element when viewed from the room side.
This RS30-O backsplash is designed to work with John Boos butcher block countertops constructed of Northern Hard Maple hardwood, so it fits projects that already specify those tops. The 4 inch height matches the stated John Boos backsplash height, creating a consistent band when multiple sections are used along a longer wall. Its 30 inch length aligns with countertop options that span from 12 inches to 144 inches, so it can finish a single short top or one segment of a multi-piece run. Because the countertops are 1-1/2 inches thick and 25 inches deep, this 3/4 inch thick, 4 inch high backsplash sits as a proportionate vertical element behind that work surface, giving a balanced look from the front edge to the wall.
The Northern Hard Maple hardwood used in this backsplash matches the John Boos butcher block tops, so grain color and texture align across joints for a clean visual line. Kiln drying to a low moisture content gives the maple a more predictable response when acclimated indoors, which aids in maintaining tight seams between the backsplash and countertop over time. Electrostatic application of the moisture resistant urea resin adhesive distributes glue through the butcher block structure, supporting bond integrity along the entire 30 inch run. The mineral oil finish on the backsplash is the same type described for the tops, sealing the wood fibers at the surface and enhancing the warm, rich maple tones so the transition between horizontal top and vertical backsplash appears continuous in both color and sheen.
The RS30-O backsplash is 4 inches high, 30 inches long, and 3/4 inch thick, so it matches the stated John Boos backsplash profile for height and thickness across that span.
This backsplash is constructed of Northern Hard Maple hardwood, so it visually matches John Boos butcher block tops made from the same maple species.
The backsplash has been finished with mineral oil, which seals the wood fibers at the surface and brings out the warm, rich colors of the maple grain.
John Boos butcher block tops and backsplashes use Northern Hard Maple hardwood and mineral oil finish, so this piece is intended to coordinate with those countertops.
The backsplash is electrostatically glued with a moisture resistant urea resin adhesive, providing a bonded butcher block structure along its full length.
The matching John Boos butcher block countertops are 1-1/2 inches thick and 25 inches deep, so this 4 inch high backsplash finishes the rear edge of that work surface.
This RS30-O John Boos butcher block backsplash ties directly into Northern Hard Maple countertops that are 1-1/2 inches thick and 25 inches deep, giving a purpose-built 4 inch high, 30 inch long vertical finish. The kiln dried maple, moisture resistant urea resin adhesive, and mineral oil finish all match the construction of John Boos butcher block tops, so a shop or installer can plan a unified maple surface from front edge to wall using this specific backsplash size wherever a 30 inch span is required.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CTMYS Mfr# MYSB | Mystery Oil For Wood Surfaces 16 oz |