Kitchen Kompact Glenwood wall cabinet gives you a 9 inch wide, 30 inch high, 12 inch deep wall unit sized for narrow runs, so you can use otherwise wasted wall space in a standard kitchen layout. The cabinet uses a recessed panel Glenwood style, which keeps the face design consistent with matching Glenwood pieces for a unified install. All frames are built of solid 3/4 inch oak, maple or beech, providing a solid hardwood front that handles repeated door use in busy kitchens. Each rail is kiln-dried, joined by mortise and tenon, and then glued for added strength, so the frame resists twisting and helps doors stay aligned over time. Solid wood corner blocks are glued and power nailed, tying cabinet sides and front together for added structural stiffness during hanging and daily use.
Solid wood hanging strips on this Kitchen Kompact wall cabinet are located at the top and bottom, giving you two continuous structural zones to secure the cabinet to wall framing. This layout spreads fastener load vertically, which helps resist sag when the cabinet is loaded with dishware or pantry items. The 3-ply end panels use a 1/2 inch thick engineered wood core with hardwood veneers, so the sides stay stable while presenting a hardwood surface for exposed ends or tight wall runs. Solid wood corner blocks that are glued and power nailed help tie these end panels to the face frame, keeping the cabinet box rigid as it is lifted, positioned, and fastened on the wall.
The Glenwood 9W wall cabinet at 9 inches wide, 30 inches high, and 12 inches deep fits narrow wall sections, so it works well beside vents, windows, or tall units where wider cabinets will not fit. The recessed panel Glenwood style matches other Kitchen Kompact Glenwood pieces, allowing this narrow wall unit to extend a run to a corner or obstacle while keeping a consistent face pattern. All frames built of solid 3/4 inch oak, maple or beech bring a hardwood face frame to these tighter spaces, so even small fillers have the same solid feel and wear characteristics as larger cabinets. End panels with 3-ply construction and a 1/2 inch thick engineered wood core with hardwood veneers keep the sides stable along narrow walls, which helps doors operate smoothly when cabinets are ganged together.
Each kiln-dried rail joined by mortise and tenon and then glued gives the Glenwood 9W a frame that stays square, which supports cleaner door alignment and reduces hinge adjustment time. Solid wood hanging strips at both the top and bottom of the wall cabinet define clear fastening lines, helping installers place screws consistently into structure for an even reveal along the run. Solid wood corner blocks that are glued and power nailed help maintain box geometry as the cabinet is clamped or pulled tight to neighboring units, keeping face frames flush. The 3-ply end panels with engineered core resist movement better than solid panels of the same thickness, so seams between cabinets in a run stay more uniform, which supports a straighter crown line and a smoother wall row appearance.
The Kitchen Kompact Glenwood 9W wall cabinet is 9 inches wide, 30 inches high, and 12 inches deep, which suits narrow wall spaces in standard kitchen layouts.
The cabinet frame uses solid 3/4 inch oak, maple or beech, giving a hardwood face structure that handles regular door use and contributes to a solid feel.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, producing tight joints that help the frame stay square for consistent door alignment.
Solid wood corner blocks are glued and power nailed, tying the cabinet sides to the frame so the box resists racking during hanging and daily loading.
End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing dimensional stability with a hardwood exterior surface.
Solid wood hanging strips on wall and base cabinets are located at the top and bottom, offering continuous structural zones for fastening to wall framing.
The Kitchen Kompact Glenwood 9W wall cabinet combines a 9 inch width with 30 inch height and 12 inch depth, letting you utilize tight wall sections in a kitchen run. Solid 3/4 inch oak, maple or beech frames, kiln-dried mortise and tenon rails, and glued, power-nailed solid wood corner blocks provide a robust structure suited to everyday kitchen use. Solid wood hanging strips at the top and bottom and 3-ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers support stable mounting and aligned runs. Choose this GW9W unit when you need a narrow Glenwood wall cabinet that maintains the same construction approach as larger Kitchen Kompact pieces.
Sold In: 1 Each