Kitchen Kompact 17"W x 30"H 12"D Glenwood Wall Cabinet, Recessed Panel - GW27W

Kitchen Kompact Glenwood Wall Cabinet Function

Kitchen Kompact Glenwood wall cabinet GW27W is a 17 inch wide, 30 inch high, 12 inch deep Glenwood wall cabinet with a recessed panel door design, so it provides a defined storage opening while staying within standard upper cabinet depth for straightforward layout and alignment. The cabinet is built within the Kitchen Kompact line, so it matches other Kitchen Kompact Glenwood pieces in a project where consistent style is required. The recessed panel door style shapes the front face, so installers can coordinate this cabinet with other recessed panel runs and maintain a uniform appearance across walls. Because this is a wall cabinet, it is designed for mounting above counters or work areas, which keeps contents accessible while freeing counter space for tools and daily use.

Key Glenwood Wall Cabinet Construction Details

• All frames are built of solid 3/4 inch oak, maple, or beech, so the face frame uses hardwood stock that resists racking under everyday door use in a typical kitchen installation.
• Each rail is kiln-dried and joined by mortise and tenon, then glued for added strength, so the front frame joints stay tight under repeated opening and closing instead of loosening at the corners.
• Solid wood corner blocks are glued and power nailed, so the cabinet box gains extra reinforcement at stress points, which supports wall mounting loads and handling during jobsite placement.
• Solid wood toe kicks are 3/4 inch thick, so matching base cabinets in the same line rest on dense material that handles daily foot contact and cleaning equipment contact along the floor.
• Solid wood hanging strips on wall and base cabinets are located at the top and bottom, so installers have defined structural members to fasten through for secure mounting to wall framing.
• End panels use 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, so the cabinet sides stay stable while presenting a hardwood surface ready for exposed or flush-end layouts.

Mounting And Framing Details For Installation

This Kitchen Kompact wall cabinet uses solid wood hanging strips on wall cabinets located at the top and bottom, so there are clear structural zones for fasteners when positioning the cabinet on studs or backing. The face frames are built of solid 3/4 inch oak, maple, or beech, so hinge screws bite into hardwood at the frame, supporting door alignment during installation and later adjustment. Each rail is kiln-dried and joined by mortise and tenon and then glued, so the front frame resists twisting while the cabinet is clamped, leveled, and secured in a run.

Using The GW27W Glenwood Cabinet In Projects

Where This Glenwood 27W Wall Cabinet Fits

The GW27W Glenwood 27W wall cabinet is 17 inches wide, 30 inches high, and 12 inches deep, so it fits typical upper cabinet runs where a 17 inch module fills a gap between other cabinets or walls. As a Kitchen Kompact Glenwood cabinet with a recessed panel, it aligns with other Glenwood components in the same product class, so installers can use this unit anywhere a matching upper cabinet is required across a kitchen or similar workspace. End panels with 3 ply construction, a 1/2 inch thick engineered wood core, and hardwood veneers provide stable sides, so this cabinet works at the end of a run or between cabinets while keeping the visible side in the same hardwood veneer family as the face.

Why These Cabinet Details Support Consistent Results

Frames built of solid 3/4 inch oak, maple, or beech give the GW27W Glenwood wall cabinet a hardwood face, so fasteners and hinges engage reliably, which supports repeatable door alignment and hardware installation from job to job. Each kiln-dried rail joined by mortise and tenon and glued adds rigidity across the opening, so measurements for hardware, trim, and alignment stay consistent instead of shifting under load. Solid wood corner blocks that are glued and power nailed tie the box together at critical junctions, so the cabinet holds square while it is lifted, clamped in a run, and fastened through the hanging strips. Solid wood hanging strips on wall cabinets located at the top and bottom concentrate mounting forces into dedicated members, so installers can plan screw locations with confidence when laying out their wall stud pattern.

Common Questions About The Glenwood Wall Cabinet

Selecting This GW27W Cabinet For Your Run

The GW27W Kitchen Kompact Glenwood wall cabinet pairs a 17 inch width, 30 inch height, and 12 inch depth with a recessed panel design, so it fills upper runs where a Glenwood module is needed. Solid 3/4 inch hardwood frames, mortise and tenon rails, solid wood corner blocks, and 3 ply end panels create a cabinet ready for wall installation alongside other Kitchen Kompact units. For projects built around the Glenwood style, this wall cabinet offers a defined size and construction approach that fits coordinated layouts.