Kitchen Kompact Glenwood wall cabinet in the GW30W size gives you a 30 inch wide, 30 inch high, 12 inch deep wall cabinet that fits standard upper runs and keeps layout simple on straight walls. The Glenwood wall cabinet uses a recessed panel design that matches the Glenwood line, so finished installations stay visually consistent across the kitchen. The cabinet belongs to the Kitchen Kompact product class, so it ties into the same construction approach across matching base and wall cabinets. All frames are built of solid 3/4 inch oak, maple or beech, which provides a stable structure when the cabinet is fastened to studs and loaded with everyday kitchen contents. The product is identified as manufacturer part number GW30W, which lets installers line this unit up accurately with project drawings and ordering lists.
Solid wood hanging strips on wall cabinets are located at the top and bottom, which gives two continuous solid wood bands for driving fasteners into wall framing along the cabinet width. This layout lets installers pull the cabinet tight at both the upper and lower edges, helping the 30 inch wide face stay flat against the wall. All frames are built of solid 3/4 inch oak, maple or beech, so hinges and door screws bite into substantial material when doors are aligned. Solid wood corner blocks are glued and power nailed, so the cabinet box handles the twisting that can happen when one side lands on a stud and the other side lands over drywall spacing.
The Kitchen Kompact 30 inch wide, 30 inch high, 12 inch deep Glenwood wall cabinet works in upper cabinet runs where a 30 inch span is called out on the plan. The recessed panel Glenwood design ties this wall cabinet visually to other Glenwood units, which matters on long walls where doors align in a row. All frames are built of solid 3/4 inch oak, maple or beech, so the cabinet face supports normal door use in everyday kitchen conditions. End panels with 3 ply construction and a 1/2 inch thick engineered wood core with hardwood veneers provide stable sides, which helps when cabinets are ganged together and clamped during installation. Solid wood hanging strips at the top and bottom of the wall cabinet back give consistent fastening locations from unit to unit along the run.
Each rail is kiln-dried, joined by mortise and tenon, and then glued for added strength, which supports a square, tight face frame that helps doors align and gaps stay more even after mounting. Solid wood corner blocks that are glued and power nailed tie the frame to the cabinet sides, giving the installer a box that resists twisting when pulled into line with neighboring cabinets. Solid wood hanging strips on wall cabinets at the top and bottom provide predictable screw paths, so the cabinet can be set, clamped to adjacent units, and drawn into final position without hunting for structure in thinner material. End panels built with 3 ply construction and a 1/2 inch thick engineered wood core with hardwood veneers help keep cabinet sides stable, which matters when shimming behind a 30 inch wide cabinet to correct wall irregularities.
The Kitchen Kompact Glenwood wall cabinet in this model is 30 inches wide, 30 inches high, and 12 inches deep, so it matches common upper cabinet sizing in kitchen layouts.
The Glenwood cabinet frame is built of solid 3/4 inch oak, maple or beech, giving the face frame substantial material for hinging doors and handling everyday cabinet use.
The Glenwood cabinet rails are kiln-dried, joined by mortise and tenon, and then glued, creating strong frame joints that help the cabinet stay square after installation.
The Glenwood wall cabinet uses solid wood hanging strips at the top and bottom, providing solid fastening areas for securing the cabinet to wall framing.
This Glenwood cabinet uses solid wood corner blocks that are glued and power nailed, reinforcing the box against racking forces during handling and mounting.
The Glenwood cabinet end panels have 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing stable, hardwood-faced sides.
The Kitchen Kompact Glenwood 30 inch wide, 30 inch high, 12 inch deep wall cabinet with recessed panel styling lines up with standard upper cabinet dimensions while matching the Glenwood design. Solid 3/4 inch oak, maple or beech frames, kiln-dried mortise and tenon rails, and solid wood corner blocks give the cabinet the structure needed for daily use in a kitchen. Solid wood hanging strips at the top and bottom support secure mounting across the cabinet width. End panels with 3 ply construction, a 1/2 inch thick engineered wood core, and hardwood veneers keep the sides stable and visually consistent. For projects using the Kitchen Kompact Glenwood series, this GW30W wall cabinet fits the 30 inch slot in the run with matching construction details.
Sold In: 1 Each