Kitchen Kompact Glenwood wall cabinet gives you a 21 inch wide, 30 inch high, 12 inch deep wall unit that fits standard upper cabinet layouts and provides consistent vertical storage in kitchen runs. The recessed panel Glenwood style defines the door look, so design planning around this cabinet matches the rest of the Glenwood line for a uniform appearance along the wall. As a Kitchen Kompact product in the Cabinets | Kitchen Kompact class, this wall cabinet is built to integrate with matching base and wall units in the same series for coordinated installations. The manufacturer part number GW21W directly identifies this 21 inch Glenwood wall cabinet, helping you align drawings, orders, and site labeling with the correct component during layout and installation.
Solid wood hanging strips on this wall cabinet are located at the top and bottom, giving you defined bands for fastener placement so the load transfers through continuous solid wood rather than just the panel face. The solid 3/4 inch frame ties into these hanging strips, creating a rigid box that supports the cabinet when it is pulled tight to the wall. Solid wood corner blocks are glued and power nailed, tying the sides, top, and bottom together so the case stays square as you clamp, shim, and fasten along the run. The 3-ply end panel construction with a 1/2 inch engineered wood core and hardwood veneers keeps the sides stable while you align faces and maintain a straight, plumb plane across multiple Glenwood cabinets.
This Kitchen Kompact 21 inch wide, 30 inch high, 12 inch deep Glenwood wall cabinet is sized for typical upper cabinet runs, so it drops into standard layouts where a 21 inch wall unit is called out on the plan. The recessed panel Glenwood door style ties it visually to other Glenwood cabinets, which supports consistent face alignment along walls that mix different widths. The solid 3/4 inch oak, maple, or beech frame builds a heavy front perimeter that carries hinge forces and door movement, so the wall cabinet serves reliably as part of everyday kitchen storage. With end panels built from 3-ply construction around a 1/2 inch engineered wood core with hardwood veneers, the cabinet sides stay stable, helping maintain a straight run when this 21 inch section is ganged with neighboring units.
Each kiln-dried rail in the frame is joined by mortise and tenon and then glued, creating joints that resist separation as temperatures and humidity shift in a typical kitchen, which keeps door gaps consistent over time. Solid wood corner blocks that are glued and power nailed lock the corners together, so the cabinet resists racking when it is lifted, positioned, and fastened to wall studs. Solid wood hanging strips on wall and base cabinets, positioned at the top and bottom, distribute mounting loads across wide strips rather than point contacts, which supports long-term holding strength along the fastening line. The solid wood toe kicks at 3/4 inch thickness in the matching base cabinets complement this wall unit, keeping vertical alignment between wall and base cabinetry more stable along the floor line. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers balance strength with dimensional control, so exposed sides maintain a clean surface while helping the full bank of Glenwood cabinets stay aligned.
The Kitchen Kompact Glenwood GW21W wall cabinet measures 21 inches wide, 30 inches high, and 12 inches deep, which matches common upper cabinet dimensions in many kitchen layouts.
The Glenwood cabinet frame is built of solid 3/4 inch oak, maple, or beech, giving the front structure strength for hanging doors and supporting daily opening and closing.
The Kitchen Kompact frame rails are kiln-dried, joined by mortise and tenon, and then glued, creating a stable joint that helps keep the cabinet square and door gaps consistent.
The Glenwood wall cabinet uses solid wood corner blocks that are glued and power nailed, bracing the box so it resists racking during handling and wall mounting.
The wall cabinet end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, which provides dimensional stability with a hardwood exterior surface.
The solid wood hanging strips on wall and base cabinets, located at the top and bottom, supply continuous solid wood for fasteners, helping distribute mounting loads effectively.
The Kitchen Kompact Glenwood 21 inch wide, 30 inch high, 12 inch deep wall cabinet combines a solid 3/4 inch oak, maple, or beech frame with mortise-and-tenon-joined rails, solid wood corner blocks, and solid wood hanging strips at the top and bottom. End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, aligning strength with a hardwood exterior. For layouts calling for a 21 inch Glenwood wall unit identified as GW21W, this cabinet delivers the specified size and construction details for a coordinated Kitchen Kompact installation.
Sold In: 1 Each