Kitchen Kompact Glenwood wall cabinet gives you an 18 inch wide, 30 inch high, 12 inch deep wall unit that fits standard upper cabinet runs and creates a defined storage bay above counters or appliances. The cabinet is part of the Kitchen Kompact Glenwood line, so it matches other Glenwood pieces in style and sizing across a project. Its recessed panel design shapes the door look, which helps coordinate with typical kitchen layouts where a clean face pattern matters across multiple cabinets. The cabinet frames are built for fixed installations in kitchen walls, so they support everyday door use without shifting in the run. With a defined 18 inch width, this wall cabinet also helps lay out predictable stud locations and filler needs when planning a row.
The solid wood hanging strips on this Glenwood wall cabinet run at the top and bottom of the back, giving defined fastening zones when locating the cabinet on studs. Because the strips are solid wood, fasteners bite into consistent material across the width, which helps the box pull tight to the wall without crushing. The 3/4 inch solid wood frame at the front creates a stable reference edge when clamping cabinets together in a run, so face frames line up while you drill and fasten between units. The 3-ply end panels with engineered wood core keep the sides flatter than solid lumber alone, helping the cabinet sit flush against walls or adjacent cabinets once it is hung.
This Kitchen Kompact 18W x 30H x 12D Glenwood wall cabinet fits upper cabinet layouts where an 18 inch module is needed to bridge between larger cabinets or terminate a run. Its recessed panel styling lets it align visually with other Glenwood units, so door and drawer fronts present a unified pattern along the wall. The solid 3/4 inch frame built from oak, maple or beech creates a defined front plane that mates cleanly to neighboring frames during installation, which helps create tight joints between cabinets. With 3-ply end panels using a 1/2 inch engineered wood core and hardwood veneers, the cabinet sides maintain a stable thickness, so scribes and fillers can be planned around a consistent box dimension.
Each kiln-dried rail joined by mortise and tenon and then glued gives the frame predictable squareness, which helps doors hang true and reduces twist when cabinets are ganged together. Solid wood corner blocks that are glued and power nailed reinforce the box at key stress points, so the cabinet resists racking during lifting and fastening to the wall, helping keep reveals even after the run is complete. Solid wood hanging strips at both the top and bottom of wall cabinets provide clear fastening lines, making it easier to align screws with studs along the full height of the back. The 3/4 inch thick solid wood toe kicks used on matching base cabinets keep the system dimensions coordinated, so uppers and bases from the same Kitchen Kompact line share predictable relationships in a kitchen layout.
The Kitchen Kompact Glenwood wall cabinet GW18W measures 18 inches wide, 30 inches high, and 12 inches deep, which fits common upper cabinet layouts and standard depth runs.
The cabinet frame uses solid 3/4 inch oak, maple or beech, so the front structure is rigid and supports doors staying aligned under everyday use and loading.
Each rail on the Glenwood wall cabinet is kiln-dried, joined by mortise and tenon, and then glued, creating strong joints that resist loosening from repeated door movement.
The Glenwood wall cabinet uses solid wood hanging strips at the top and bottom of wall cabinets, providing continuous solid backing for fasteners into wall studs.
The end panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving dimensional stability with a hardwood-faced side surface.
Solid wood corner blocks are glued and power nailed, tying the cabinet corners together so the box resists racking during handling and mounting.
The Kitchen Kompact Glenwood 18W x 30H x 12D wall cabinet combines a solid 3/4 inch wood frame with kiln-dried mortise-and-tenon rails, solid wood corner blocks, and solid wood hanging strips, giving you a stable box for upper-cabinet runs. With 3-ply end panels built around a 1/2 inch engineered wood core and hardwood veneers, the cabinet sides stay stable while matching the hardwood frame visually. Use this GW18W unit wherever an 18 inch module closes a kitchen wall layout and you want the Glenwood recessed panel style to carry consistently across the project.
Sold In: 1 Each