Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet is a 24 inch wide, 30 inch high, 12 inch deep wall cabinet designed for kitchen installations where a standard-sized upper cabinet is needed. The cabinet uses a recessed panel Glenwood design, which gives a defined framed look that matches other Glenwood pieces in the same line. All frames are built of solid 3/4 inch oak, maple, or beech, so the face frame holds hinges and doors firmly during everyday use. Each rail is kiln-dried and joined by mortise and tenon, then glued, which creates stable frame joints that keep doors aligned under repeated opening and closing. Solid wood corner blocks are glued and power nailed, tying the cabinet corners together for rigidity when the cabinet is loaded. Solid wood hanging strips on the wall cabinet are located at the top and bottom, giving two solid mounting bands for securing the cabinet to wall framing.
This Kitchen Kompact wall cabinet measures 24 inches wide, 30 inches high, and 12 inches deep, which fits common upper cabinet runs above counters or worktops. The solid wood hanging strips at the top and bottom of the wall cabinet give defined mounting zones that accept fasteners into real wood, helping achieve a solid installation against wall framing. The 3/4 inch thick solid wood frame supports hinge mounting, so door hardware attaches into a strong edge. End panels built from 3-ply, 1/2 inch thick engineered wood core with hardwood veneers provide a stable side surface, which helps maintain alignment when cabinets are installed in a row. The Glenwood recessed panel style integrates with other Glenwood cabinets, so the 24 inch wide wall unit can sit in the run between matching base and tall units for a consistent front elevation.
The Glenwood 24W wall cabinet is sized for 24 inch wide upper cabinet openings in kitchen layouts, so it works in standard runs above counters, workspaces, or appliances. Its 30 inch height suits many typical ceiling heights, allowing installers to align the bottom with other 30 inch wall units. The 12 inch depth positions the cabinet front at a comfortable reach line, keeping storage accessible above counters. Solid wood hanging strips at both the top and bottom create two horizontal bearing lines, which helps when tying multiple wall cabinets together on a shared level line. End panels with a 3-ply, 1/2 inch thick engineered wood core and hardwood veneers allow this cabinet to terminate a run with a finished hardwood face or sit between cabinets without telegraphing movement. The recessed panel Glenwood design maintains a consistent style wherever this 24 inch module is placed.
The solid 3/4 inch oak, maple, or beech frame gives a defined, sturdy reference for aligning adjacent cabinet faces and doors, which is useful when setting reveals along a wall. Kiln-dried rails with mortise and tenon joints that are glued for added strength keep the frame square, reducing the need for later hinge adjustments due to joint movement. Solid wood corner blocks that are glued and power nailed tie the cabinet box together, helping it stay rigid while being lifted, positioned, and fastened. Solid wood hanging strips on wall cabinets at the top and bottom distribute load into two structural bands, which helps maintain level alignment when cabinets are joined side by side. End panels with 3-ply, 1/2 inch thick engineered wood core and hardwood veneers resist warping, supporting consistent gaps and straight lines between cabinets. The specified dimensions of 24 inches width, 30 inches height, and 12 inches depth give predictable sizing, simplifying layout, cut-list planning, and coordination with trim or fillers.
The GW24W cabinet is 24 inches wide, 30 inches high, and 12 inches deep, so it fits common upper cabinet layouts while keeping storage reachable above work surfaces.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, giving a strong structure for fastening hinges and supporting doors under regular kitchen use.
Each rail is kiln-dried and joined by mortise and tenon, then glued, creating rigid joints that help the frame stay square and preserve consistent door alignment.
The GW24W wall cabinet uses solid wood hanging strips located at the top and bottom, spreading cabinet load across two structural bands during mounting.
Cabinet corners use solid wood corner blocks that are glued and power nailed, tying the box together so it stays rigid while being handled and loaded.
The end panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing dimensional stability with a hardwood appearance.
The Kitchen Kompact Glenwood 24 inch wide wall cabinet combines a solid 3/4 inch hardwood frame, kiln-dried mortise and tenon rails, and solid wood corner blocks, giving a rigid structure for everyday kitchen use. Solid wood hanging strips at the top and bottom create clear mounting lines for setting the cabinet into level runs with neighboring units. End panels with a 3-ply, 1/2 inch thick engineered wood core and hardwood veneers add stability along the sides while maintaining a hardwood look in exposed positions. With its 24 inch width, 30 inch height, and 12 inch depth, this Glenwood wall cabinet fits common upper cabinet layouts, aligning cleanly with matching Kitchen Kompact Glenwood pieces for a coordinated installation.
Sold In: 1 Each