Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet identifies this 12 inch wide, 30 inch high, 12 inch deep unit as part of the Glenwood line, so wall layouts can be planned around a known size when setting elevations and balancing cabinet runs. The cabinet uses a recessed panel style, giving a defined frame and center panel that aligns with other Glenwood pieces in the same series for a consistent appearance across a kitchen. All frames are built of solid 3/4 inch oak, maple or beech, so the front structure provides a solid wood surface for hinges and doors where fasteners bite into real lumber instead of thin material. This solid frame construction supports repeated door use over time in busy kitchen installations where upper cabinets see frequent opening and closing.
Solid wood hanging strips on wall cabinets, located at the top and bottom, give two dedicated mounting zones, so fasteners can be driven through solid wood when setting this 12 inch deep unit on the wall. That continuous strip layout supports leveling and shimming along the full cabinet width during installation, which helps align this 30 inch high cabinet with adjacent units in a straight run. The 12 inch cabinet depth works within typical upper cabinet projections, so installers can maintain a consistent front line across Glenwood wall cabinets in a kitchen or similar project.
The Glenwood 12W wall cabinet size of 12 inches wide, 30 inches high, and 12 inches deep suits narrow wall spaces, end-of-run positions, or areas around vents where a full-width unit is not possible. As a wall cabinet in the Kitchen Kompact Glenwood line, it works in upper rows above base cabinets that share the same design language, allowing installers to plan matched combinations using the same recessed panel profile. The solid 3/4 inch oak, maple or beech frame on this wall unit supports hinge locations for doors sized to this narrow width, providing a firm wood base where hinge screws seat along the stile. Because the end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, the cabinet sides provide stable surfaces against neighboring units when clamps and fasteners pull cabinets together during layout.
Each rail on the Glenwood 12W is kiln-dried, joined by mortise and tenon, and then glued, which gives the wall cabinet a rigid face frame that helps keep openings square when doors are hung and adjusted. That precise joinery works with the solid wood corner blocks, which are glued and power nailed, to hold the cabinet box in alignment while it is lifted, positioned, and fastened through the solid wood hanging strips. The solid wood hanging strips at the top and bottom of the wall cabinet present predictable fastening zones, so installers can drive mounting fasteners into solid stock along both the upper and lower portions of the back. End panels built with a 3-ply, 1/2 inch engineered wood core and hardwood veneers contribute to dimensional stability, helping the cabinet maintain straight sides against walls and adjacent cabinets, which supports cleaner seams along the run.
The Kitchen Kompact Glenwood wall cabinet is 12 inches wide, 30 inches high, and 12 inches deep, so it fits narrow upper wall spaces and aligns with typical kitchen wall cabinet depths.
The Glenwood wall cabinet frame is built of solid 3/4 inch oak, maple or beech, giving a solid wood front for hinges and joints that supports repeated door use.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating a strong, square frame that helps doors hang properly and stay aligned over time.
The solid wood hanging strips at the top and bottom provide continuous solid fastening areas, allowing mounting fasteners to transfer cabinet weight into solid wood.
The end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving a smooth outer surface with internal stability against warping.
The GW12W part number designates this Glenwood wall cabinet as a 12 inch wide wall unit in the Kitchen Kompact Glenwood series, helping identify it in project takeoffs.
The Kitchen Kompact Glenwood 12W wall cabinet ties a 12 inch width, 30 inch height, and 12 inch depth to solid wood frame construction, giving a defined size and structure for upper layouts. Solid wood hanging strips, mortise-and-tenon face frame rails, and 3-ply end panels provide practical mounting and alignment benefits when building continuous wall runs. For projects using Kitchen Kompact Glenwood components from Wurth Baer Supply, this GW12W wall cabinet adds a narrow, recessed-panel option that can be planned confidently into measured kitchen or shop installations.
Sold In: 1 Each