Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet GW15W is a 15 inch wide, 30 inch high, 12 inch deep wall cabinet that provides a narrow upper storage space while keeping dimensions consistent with standard wall runs. The cabinet uses a recessed panel Glenwood design that ties into the broader Kitchen Kompact line for layout continuity on multi-cabinet installations. All frames are built of solid 3/4 inch oak, maple, or beech, so the face structure carries door loads and daily use without relying on thin edge material. Each rail is kiln-dried, then joined by mortise and tenon and glued, creating a tight, stable joint that helps the frame stay square after hanging and over time. Solid wood corner blocks are glued and power nailed, tying sides to front and helping the cabinet resist racking when loaded.
The Kitchen Kompact wall cabinet GW15W measures 15 inches wide, 30 inches high, and 12 inches deep, so it fits typical upper cabinet layouts that mix wider units with narrow fillers or alignment pieces. Solid wood hanging strips on wall cabinets are located at the top and bottom, giving two continuous structural members that accept fasteners along the width of the unit for stable mounting. All frames are built of solid 3/4 inch oak, maple, or beech, so loads from doors and stored items transfer through a rigid frame perimeter. Each kiln-dried rail is joined with mortise and tenon and glued, helping the frame maintain a consistent reveal between doors and adjacent cabinets after installation.
The Glenwood 15W wall cabinet, at 15 inches wide, 30 inches high, and 12 inches deep, fits upper runs that need a narrower cabinet between wider units or near room transitions while keeping standard 30 inch height. The recessed panel Glenwood design matches the Kitchen Kompact Glenwood series, so using GW15W beside other Glenwood wall and base cabinets creates a unified front appearance. End panels made from 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers give the cabinet sidewalls strength with a hardwood-veneered surface, which is useful when the cabinet side is exposed at the end of a run. Solid wood toe kicks at 3/4 inch thickness on matching base cabinets help align visual lines when pairing this wall cabinet above a base in the same series.
All frames are built of solid 3/4 inch oak, maple, or beech, so fasteners holding hinges or face hardware bite into full-thickness hardwood, supporting consistent gaps and reliable door swing over time. Each rail is kiln-dried, then joined by mortise and tenon and glued, creating joints that resist movement from seasonal changes and daily operation, which supports repeatable alignment when multiple GW15W units sit side by side. Solid wood hanging strips on wall cabinets, located at the top and bottom, provide two structural attachment lines that help keep the cabinet plane true against the wall when fastening across studs. Solid wood corner blocks that are glued and power nailed tie the cabinet box together, adding resistance to racking when the cabinet is loaded with contents or when doors are frequently operated.
The Kitchen Kompact Glenwood wall cabinet GW15W is 15 inches wide, 30 inches high, and 12 inches deep, so it fits standard upper cabinet layouts using a 30 inch wall height.
The GW15W frame is built of solid 3/4 inch oak, maple, or beech, providing a hardwood structure that supports hinges, doors, and typical wall cabinet loading.
The Glenwood wall cabinet frame uses kiln-dried rails joined by mortise and tenon and glued, forming tight joints that help the frame stay square after mounting.
The GW15W uses solid wood hanging strips at the top and bottom of wall cabinets, giving two strong fastening points across the width for secure wall attachment.
The end panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, combining structural support with a hardwood-faced side surface.
The GW15W uses solid wood corner blocks that are glued and power nailed, tying the cabinet box together to resist racking under normal wall cabinet loads.
The Kitchen Kompact Glenwood wall cabinet GW15W combines a 15 inch width, 30 inch height, and 12 inch depth with a recessed panel Glenwood design, so it works as a narrow upper unit within a coordinated Kitchen Kompact layout. Solid 3/4 inch oak, maple, or beech frames, kiln-dried mortise and tenon joints, and solid wood corner blocks create a cabinet structure suited to repeated door operation and typical storage loads. Solid wood hanging strips at the top and bottom of wall cabinets, along with 3-ply end panels with engineered wood cores and hardwood veneers, support stable mounting and a finished appearance. Use GW15W when a 15 inch wide Glenwood wall cabinet is needed to finish or balance an upper run.
Sold In: 1 Each