Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet is a 36 inch wide, 30 inch high, 12 inch deep wall cabinet built for everyday kitchen use. The cabinet uses a recessed panel design identified as Glenwood Wall Cabinet, Recessed Panel - GW36W, giving a consistent look within the Kitchen Kompact Glenwood line. The frames are built of solid 3/4 inch oak, maple, or beech, so the main front structure relies on hardwood for strength where hinges and doors operate. Each rail in the frame is kiln-dried and joined by mortise and tenon, then glued, which creates a stable joint that resists movement in normal kitchen environments. Solid wood corner blocks are glued and power nailed to reinforce critical corners, supporting the cabinet when it is loaded. Solid wood toe kicks at 3/4 inch thickness and solid wood hanging strips on wall and base cabinets extend that hardwood structure to key load-bearing areas.
The GW36W wall cabinet size of 36 inches wide, 30 inches high, and 12 inches deep establishes its footprint on the wall and in relation to adjoining cabinets. Solid wood hanging strips on wall cabinets, located at the top and bottom, give defined zones for fastening into wall framing, helping installers line up screws along strong hardwood rather than only panel material. The solid wood corner blocks that are glued and power nailed tie the cabinet sides and frame together, helping the box remain square when it is lifted and set into place. End panels built with 3-ply construction around a 1/2 inch thick engineered wood core with hardwood veneers provide a stable side surface, which matters when aligning adjacent cabinets in a straight, flush run.
The Kitchen Kompact 36 inch wide by 30 inch high by 12 inch deep Glenwood wall cabinet fits into standard upper cabinet layouts where a 36 inch span is needed over work areas. Its recessed panel Glenwood design ties into other Kitchen Kompact cabinets in the same product class, supporting a uniform wall line. Frames built from solid 3/4 inch oak, maple, or beech place hardwood at the front of the cabinet, which is the working face of a wall run. That hardwood face supports hinges and door loading where users open and close doors many times a day. Solid wood corner blocks that are glued and power nailed tie into this hardwood frame, so the front, sides, and top work together when the cabinet is part of a longer wall installation.
Each frame rail on the Glenwood 36W cabinet is kiln-dried, joined by mortise and tenon, and then glued, which supports tight, square corners that help doors hang straight and line up with neighboring units. Solid wood hanging strips on wall cabinets at the top and bottom give installers continuous hardwood to fasten through, supporting even load transfer into wall framing along the cabinet width. End panels with 3-ply construction and a 1/2 inch thick engineered wood core wrapped with hardwood veneers provide stable, flat sides that help maintain flush alignment where cabinets meet. The 3/4 inch thick solid wood toe kicks used in the line support a consistent base structure, so wall and base cabinets share similar hardwood elements across the kitchen, which matters when aiming for straight, level installations over time.
The GW36W Glenwood wall cabinet is 36 inches wide, 30 inches high, and 12 inches deep, so it matches common upper cabinet sizing in standard kitchen layouts.
The Glenwood cabinet frame uses solid 3/4 inch oak, maple, or beech, giving a hardwood face where hinges, doors, and face joints carry daily use loads.
The frame rails are kiln-dried, joined by mortise and tenon, and then glued, which creates rigid joints that help keep the frame square for proper door alignment.
The GW36W uses solid wood hanging strips on wall cabinets at the top and bottom, giving defined hardwood fastening areas into wall framing.
The cabinet uses solid wood corner blocks that are glued and power nailed, tying the frame and sides together so the box resists racking under load.
The end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing stable, flat sides that accept finish consistently.
The Kitchen Kompact Glenwood 36 inch wide, 30 inch high, 12 inch deep wall cabinet brings a recessed panel GW36W design backed by solid 3/4 inch hardwood frames, kiln-dried mortise and tenon rails, and reinforced corners. Solid wood hanging strips on wall cabinets at the top and bottom create clear fastening zones for mounting into wall framing. End panels with 3-ply, 1/2 inch thick engineered wood core and hardwood veneers provide stable sides that help adjacent cabinets line up cleanly. For a cabinet run using the Kitchen Kompact Glenwood style, this wall cabinet supplies the structural and dimensional details needed for consistent installation and use.
Sold In: 1 Each