Nickel Concealed Hinge for 1/2 Inch Overlay Doors with a Wide Swing

This Salice Series 200 hinge brings a 120 degree opening to 1/2 inch overlay doors on face-frame and frameless cabinets, with a self-close spring and a nickel finish that holds up in busy shop and residential installs alike.

Key Features

• 120 degree opening angle swings the door wider than the standard 110, improving access to cabinet contents.
• Half crank arm, 1/2 inch overlay positions doors in a partial-overlay arrangement, including pairs sharing a center partition.
• Self-close spring pulls the door shut over the last few degrees of travel.
• Screw-on mounting fastens the hinge directly to the cabinet without clip hardware or system holes.
• Face-frame and frameless compatibility covers both American-style and European-style cabinet boxes with the matching Salice plate.
• Nickel finish on plated steel coordinates cleanly with other nickel hardware across the project.

Wide Swing on Partial-Overlay Doors

The 120 degree opening sets this hinge apart from the standard 110 degree range: the door travels farther, which matters on cabinets where full access to a deep box makes a practical difference. The half crank geometry positions the door at a 1/2 inch overlay, so it covers part of the cabinet side rather than the full panel. That is the configuration two adjacent doors use when they share a single center partition, each door taking its half without the arms colliding. The 35mm cup bores into the back of the door, and the hinge arm mounts to a Salice base plate on the cabinet, sold separately.

Nickel Finish and a Reliable Spring Close

The hinge body is plated steel in a nickel finish. Nickel reads as a neutral warm metal, and it pairs without friction alongside brushed or satin nickel pulls, slides, and other cabinet hardware already on the job. The self-close spring draws the door shut from a few degrees open so it does not drift. This is not a soft-close hinge: the spring closes the door, but there is no damper to cushion the final contact. For a cushioned, quiet close on the same overlay and opening angle, the Silentia+ soft-close version of this series is the option to specify instead.

Where It Fits

Cabinet shops and contractors working through remodels, multi-unit builds, or production runs will recognize this as a practical Series 200 choice where the extra door swing earns its place. It suits face-frame cabinets where the stile geometry calls for a screw-on mount, and frameless boxes where system holes are not the preference. Because this is a screw-on hinge, it works on cabinets with or without pre-drilled 5mm system holes. Pair it with Salice base plates: plates are brand-specific and a plate from another manufacturer will not connect to this hinge. For doors heavier or taller than standard, check the Salice load table to confirm the right hinge count per door.

Common Questions

More Access, Clean Hardware, Doors That Close Themselves

Specify this hinge when the design calls for partial-overlay doors with a wider swing, self-close convenience, and a nickel finish that fits right in with the rest of the hardware on the job.