
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice 200 Series 120 degree hinge gives you a self-closing, concealed hinge system developed specifically for projects that require hidden hardware on cabinet doors. The hinge belongs to the Salice 200 Series, so it works as part of an integrated system of hinges tailored to cabinet applications where appearance and function both matter. It is designed for use in both residential and commercial cabinets, allowing one hinge specification to serve across different job types. As a concealed cabinet hinge, it keeps hardware out of sight once the door is closed, which supports clean cabinet faces in kitchens, offices, or built-ins. The hinge uses a self-closing function that pulls the door shut, helping doors return to the closed position without additional catches. This hinge is backed by a lifetime warranty, tying long-term use expectations directly to the product design.
This Salice C2J9G99 hinge is a concealed cabinet hinge designed to work with all Salice mounting plates in the Series 200 family, so the hinge interfaces with a consistent plate pattern across cabinets that use this system. The 200 Series 120 degree opening hinges have a cup depth of only 11 mm, which allows the hinge cup to be bored into doors with that depth available and supports compatibility with most cabinet door profiles described for this series. The hinge cup edge drilling distance of 3 mm to 6 mm defines the allowable setback from the door edge to the cup, guiding boring-machine or jig setups. A patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw provides lateral door movement, giving room to fine-tune reveals and door alignment after mounting the hinge.
The Salice Series 200 120 degree self-closing hinge is designed for use in both residential and commercial cabinets, so it suits kitchens, offices, and similar casework that require concealed hinges. As a concealed cabinet hinge in the European standard hinge category, it supports frameless and face-frame layouts where hidden hardware and consistent reveals are important. Its 120 degree opening angle allows doors to open wide enough for normal cabinet access while keeping within the stated range for the series. The all steel hinge body gives a metal structure intended for repeated door cycles in active spaces. Because Series 200 hinges are designed to work with all Salice mounting plates, the hinge can be used wherever those mounting plates are specified across a project, simplifying hinge selection for jobs that mix cabinets and layouts under the same hardware system.
The hinge is nickel plated for corrosion resistance, which provides a protective finish over the steel and supports use in typical cabinet environments where moisture and hand contact occur. Its permanently self lubricating design utilizing environmentally safe lubricants means the moving parts are engineered to keep operating smoothly without separate lubricants under normal conditions, supporting quiet, consistent door motion. The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw enables fine lateral tuning of the door after installation, helping align margins between doors and adjacent panels without remounting the cup. Because 200 Series hinges exceed ANSI/BHMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications, the hinge reflects tested performance and manufacturing and environmental management practices defined in those standards. The self-closing function helps pull doors tightly to the cabinet, which supports uniform closing behavior along a run of cabinets built around the same hinge system.
The Salice 200 Series 120 degree self-closing hinge is designed for use in both residential and commercial cabinets, so it serves kitchen, office, and similar cabinet installations.
The 200 Series 120 degree opening hinges provide a 120 degree opening angle, giving wide access to cabinet interiors within the range defined for this series.
The 200 Series 120 degree opening hinges have a cup depth of only 11 mm and a hinge cup edge drilling distance of 3 mm to 6 mm, guiding boring setup on cabinet doors.
This hinge has patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, allowing lateral door movement for fine reveal alignment.
The hinge is an all steel hinge that is nickel plated for corrosion resistance, giving a metal body with a protective finish suited to cabinet environments.
Series 200 hinges are designed to work with all Salice mounting plates and are compatible with Smove soft-close devices, supporting integrated cabinet hardware setups.
The Salice 200 Series 120 degree hinge C2J9G99 gives you a concealed, self-closing hinge designed for both residential and commercial cabinets, built as an all steel hinge that is nickel plated for corrosion resistance. Its 11 mm cup depth, 3 mm to 6 mm hinge cup edge drilling distance, and patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw support repeatable drilling and straightforward fine-tuning of reveals. Because Series 200 hinges are designed to work with all Salice mounting plates and are compatible with Smove soft-close devices, this hinge fits into the broader Salice 200 Series system for integrated cabinet hardware across a project.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each | UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each | UBS2A637XF Mfr# S2A637XF | 94˚ Opening Angle Reduction Clip, Nickel-Plated | ||||
Sold in: 1 Each | UBS2XX83A1 Mfr# S2XX83A1 | Hinge Arm Cover Caps White with No Logo | ||||
Sold in: 1 Each | UBS2XX83A3 Mfr# S2XX83A3 | Plain Cover Cap for Hinge Arm, Black |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBC2R8G99 Mfr# C2R8G99 | Salice 200 Series Free Swinging Half Overlay Face-Frame;Frameless Hinges Nickel, 120° Dowel - C2R8G99 |