Nickel Concealed Hinge for 1/2" Overlay Doors at 120 Degrees

This Salice Series 200 Logica hinge is a self-close concealed hinge built for 1/2" overlay doors on both face-frame and frameless cabinets, with toolless arm engagement and a 120-degree opening angle.

Key Features

• 120-degree opening angle swings the door wide for generous access to cabinet interiors.
• 1/2" overlay, half-crank arm positions the door at a partial overlay, the geometry required where two doors share a center partition.
• Self-close spring draws the door shut over the last few degrees of travel.
• Toolless Logica mounting clips the hinge arm to the base plate without a screwdriver.
• Side and height adjustment lets you align doors to an even reveal after installation.
• Works on face-frame and frameless cabinets when paired with the matching Salice base plate.

Where the 120-Degree Swing Makes the Difference

The extra swing beyond the standard 110-degree hinge matters in two situations: deep cabinets where full interior reach counts, and layouts where the door needs to clear an adjacent door or a roll-out shelf without the installer adding an angle-restriction clip to back it down. At 1/2" overlay with a half-crank arm, this hinge is the right geometry for shared-partition door pairs, where two doors meet on one center stile or panel and each covers roughly half the side. The 35mm cup bores into the back of the door, and the arm connects to a Salice base plate mounted to the cabinet, which is a separate purchase. That plate needs to be a Salice plate matched to your cabinet construction; plates are brand-specific and not interchangeable across manufacturers.

Steel Construction in a Nickel Finish

The hinge body is steel with a nickel finish. Nickel sits naturally alongside brushed metal drawer pulls, bin cup hardware, and other nickel-toned cabinet accessories, so it suits any run where the visible hardware coordinates in that register. The self-close spring is built into the hinge, so no separate add-on damper is needed to keep doors from hanging open. Adjustment is available at both the side and height axes, which is what brings a pair of doors on a shared partition to a matched reveal once the plates are set.

The Right Pick for Production and Remodel Work

This hinge suits cabinet shops building partial-overlay frameless boxes as easily as it suits contractors fitting face-frame kitchens. The toolless Logica clip speeds up door-hanging on high-count jobs, and the side and height adjustment handles the inevitable small variation across a run of cabinets. It is a self-close hinge, meaning the spring closes the door but does not cushion it. For projects where a damped, quiet close is specified, the Silentia+ soft-close version of this series is the one to quote. Standard door thickness for this hinge is 16 to 22mm. For doors thicker than 22mm, use a thick-door hinge with the appropriate cup geometry.

Common Questions

Wide-Opening Doors That Close on Their Own

Specify this hinge when partial-overlay doors need a wider swing than a standard hinge provides, with toolless installation and self-close built in across face-frame and frameless cabinets.