Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Logica hinge hangs full overlay doors on frameless or face-frame cabinets, with a 120 degree opening and a self-close spring, in a nickel finish.
The 120 degree opening angle is the reason to choose this hinge over the standard 110 degree version. The extra swing clears a wider arc before the door stops, which matters when a cabinet sits near a wall, an appliance, or another run of cabinetry and the door needs to travel farther to give full access to the box. The 35mm cup bores into the back of the door, and the arm connects to a Salice base plate mounted on the cabinet side or face-frame stile. That plate is a separate purchase, matched to your cabinet construction and the overlay position you need.
The hinge body is steel with a nickel finish. Nickel sits in the middle of the hardware finish spectrum, warmer than chrome and cooler than brass, so it pairs cleanly with brushed nickel pulls and bar pulls without demanding an exact match. The self-close spring is built into the hinge, so there is no separate mechanism to install or adjust. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm give enough range to correct alignment once the cabinet is installed and settled.
This is the right hinge when a full overlay door needs more swing room than the standard 110 degree option provides, and a spring-pull close is what the project calls for. It works on frameless boxes and face-frame cabinets, making it a practical stock choice for shops and contractors running mixed cabinet types on the same job. For doors in the standard 16 to 22mm thickness range, this hinge fits without modification. If the project calls for a damped, cushioned close rather than a spring pull, the Silentia+ soft-close version of this series is the correct alternative. A matching Salice base plate is required and sold separately; Salice plates are not interchangeable with other brands.
No. The 35mm cup and 45mm boring pattern are the same as the standard 110 degree version, so the door preparation is identical. The wider swing comes from the hinge geometry, not a different bore.
No. A Salice base plate is required and sold separately. Match the plate to your cabinet type, whether frameless or face-frame, and to the door position you want.
This hinge is self-close: a spring draws the door shut over the last few degrees. Soft-close uses a damper to slow the door so it settles quietly. This hinge pulls the door closed but does not cushion the final contact. For a damped close, choose the Silentia+ soft-close version.
No. Salice plates are specific to Salice hinges. A plate from Blum, Grass, Hettich, or another brand will not connect to this hinge arm.
Specify this hinge when a full overlay door needs the extra clearance of a 120 degree swing, a nickel finish that coordinates with the rest of the hardware, and a self-close spring that gets the door shut without extra hardware.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBS2A637XF Mfr# S2A637XF | Salice 94° Hinge Stop Device for Series 200 Hinges S2A637XF |
