Nickel Concealed Hinge for Half Overlay Doors With a Wide 120-Degree Swing

This Salice Series 200 Rapido hinge hangs half overlay doors on face-frame and frameless cabinets, self-closing with a 120-degree opening and expanding dowel mounting in a nickel finish.

Key Features

• 120-degree opening angle swings the door farther back than the standard 110-degree hinge, giving better access to cabinet contents.
• Half overlay, half-crank arm positions the door to overlap the cabinet side partially, the geometry used when two doors share a center partition.
• Self-close spring pulls the door shut automatically over the last few degrees of travel.
• Expanding dowel mounting locks the hinge cup securely into the door bore without cup screws.
• Nickel finish on plated steel coordinates with brushed-metal cabinet hardware across kitchens and baths.
• Side and height adjustment dials in even reveals after the door is hung.

Where the 120-Degree Opening Makes a Difference

Most concealed cabinet hinges swing to 110 degrees, which covers everyday use. The 120-degree geometry here opens the door noticeably farther back, a practical advantage on cabinets where you need clear access to the full interior without the door in the way. Think wall cabinets in tight galley kitchens, pantry units where the door swings close to an adjacent run, or any application where that extra ten degrees prevents the door from blocking a reach. The half-crank arm places the door at a partial overlay relative to the cabinet side, which is the correct geometry for a pair of doors meeting on a shared center partition. The 35mm cup bores into the door back, and the arm connects to a Salice base plate mounted on the cabinet, sold separately. Use Salice plates with this hinge; plates are brand-specific and will not interchange with other manufacturers.

Nickel Finish and a Solid Steel Build

The hinge body is plated steel in a nickel finish. Nickel sits naturally alongside brushed and satin-metal pulls, knobs, and slides, so it fits into hardware packages without a finish mismatch. The expanding dowel cup attachment anchors the cup in the door bore mechanically, which gives a firm, rattle-free seat over the long run of daily openings and closings. Side adjustment of plus 4.5 and minus 1.5 millimeters and height adjustment of plus or minus 2 millimeters let you align paired doors to a consistent reveal once the cabinet is in place.

The Right Fit for Face-Frame and Frameless Work

This hinge works on both face-frame and frameless cabinets, so it carries across mixed project types without swapping to a different SKU. It suits cabinet shops running production on partial-overlay face-frame lines, remodelers matching an existing half-overlay layout, and contractors who want the wider opening on any frameless box with a standard door pair. Standard doors in the 16 to 22mm thickness range are the target. For a quieter, damped close rather than a spring pull, look to the Silentia+ soft-close version in the Series 200 line. This one closes on its own but does not cushion the final contact.

Common Questions

More Clearance, Clean Nickel, and a Door That Closes Itself

Choose this hinge when the job calls for half overlay doors that swing wide, close on their own, and finish in a nickel that fits the hardware already on the plan.