Berenson Opus Series Rubbed Bronze 16-3/8" (416 mm) Center to Center Appliance Pull, -7157-1010-C

Berenson Opus Appliance Pull For Appliance Doors

Berenson Opus appliance pull uses a 16-3/8 inch center to center layout, which spaces the mounting holes for larger appliance or cabinet fronts and helps installers match common wide-handle drilling patterns on tall or heavy doors. This pull is part of the Opulence Series, so it follows a coordinated design language that lets projects carry the same look across multiple handles when matching other Opulence pieces. The pull is built as an appliance pull within the decorative hardware and moldings category, giving it proportions suited to appliance-scale doors rather than smaller cabinet faces. A base diameter of 1-1/4 inch supports the handle footprint at each mounting point, which helps spread load on the surface and is useful on heavier fronts. Overall length of 19-1/8 inch gives the hand plenty of grab area, which supports comfortable use on high-traffic doors.

Key Opulence Pull Details That Help On Site

• The 16-3/8 inch center to center dimension defines the exact drilling distance, so installers can lay out holes confidently and align this pull with existing or planned wide-bore patterns on tall doors.
• The 19-1/8 inch overall length gives a long grasping surface, which helps users get leverage on larger appliance panels and can improve day-to-day handling on heavy fronts.
• The 2-5/16 inch projection sets how far the pull stands off the door, creating hand clearance that matters when working near panel reveals, adjacent fronts, or thicker appliance doors.
• The 1-1/4 inch base diameter at each end supports the handle on the surface, which can help distribute load around the mounting points on substantial doors or panels.
• The oil rubbed bronze finish defines the rubbed bronze color tone on the visible surfaces, so the pull can visually coordinate with other oil rubbed bronze decorative hardware on the same project.
• The zinc die cast material establishes a metal construction, giving the pull a consistent formed body that suits interior decorative hardware applications.

Installation Dimensions For 16-3/8 Inch Spacing

The defined 16-3/8 inch center to center measurement provides the key layout reference, so installers can mark and drill mounting points precisely when fitting this pull to an appliance or cabinet front. A 19-1/8 inch overall length means the handle extends past the hole spacing at both ends, which helps with visual proportion on wider doors and alignment with other trim elements. The 2-5/16 inch projection locates the grip away from the face, giving space for fingers between the pull and surface and helping avoid knuckle contact with raised panels. With a width of 1-1/4 inch across the pull body, the hand contacts a defined surface, which supports a stable grip during regular use of doors or panels.

Where This Opulence Series Appliance Pull Fits

Using The Rubbed Bronze Pull On Appliance Fronts

This Opulence Series appliance pull sits within the appliance pulls class, so its scale matches appliance fronts and larger cabinet panels rather than compact drawers. The oil rubbed bronze finish establishes a dark rubbed bronze appearance, which lets the pull visually tie into broader oil rubbed bronze decorative schemes on doors and adjacent hardware. Because the handle measures 19-1/8 inch long, it suits tall refrigerator-style panels or full-height pantry doors where a longer linear element balances the door size. The 1-1/4 inch base diameter at each contact point creates a noticeable footing on the surface, supporting the look of a substantial appliance handle on thicker doors.

The zinc die cast construction shapes the pull as a single formed metal body, which provides consistent contours around the 1-1/4 inch width grip area for the hand. When combined with the 2-5/16 inch projection, this shape gives fingers room behind the handle, which matters on doors that may be opened from different angles. The 16-3/8 inch center to center spacing means this pull aligns with wide drilling patterns commonly chosen for appliance-scale hardware, helping maintain straight visual lines across a run of tall units when several identical pulls are used.

Dimensions That Support Repeatable Handle Layouts

The clearly specified 16-3/8 inch center to center distance is central for layout because it sets the horizontal measurement installers follow when transferring hole locations to doors and panels. That dimension, paired with the 1-1/4 inch base diameter, helps define edge clearances so the bases sit comfortably within stile widths or panel rails. The 2-5/16 inch projection value defines how far the handle projects into the room, which supports planning around adjacent cabinet doors or nearby obstacles so the handle does not visually crowd neighboring hardware.

The 1-1/4 inch width across the pull body combines with the 19-1/8 inch length to create a linear pull that looks proportionate on full-height fronts, which can be important when aligning this handle with surrounding trim details. Because the pull is designated as a Berenson Corporation Opus Series appliance pull with manufacturer part number 7157-1010-C, installers and specifiers can reference that identifier when matching this piece with other Opus Series items on the same project.

Common Questions About This Opus Appliance Pull

Selecting This Pull For Appliance-Scale Fronts

This Berenson Opus appliance pull pairs a 16-3/8 inch center to center layout with a 19-1/8 inch overall length, giving installers a defined drilling pattern and a handle scaled for appliance or tall cabinet fronts. With zinc die cast construction and an oil rubbed bronze finish, it fits projects needing a rubbed bronze look across substantial doors. Use the manufacturer part number 7157-1010-C when specifying this Opulence Series appliance pull for coordinated decorative hardware layouts.