Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX National disc tumbler cam lock, 1-3/4 inch cylinder with 90 and 180 degree CW and CCW rotation, bright brass C8060-MKKD-3 secures drawers and right-hand or left-hand doors, so one lock style can be used across typical cabinet layouts. The 1-3/4 inch cylinder length supports applications where the combined thickness of front and frame does not exceed the cylinder length, which helps match the lock body to common cabinet construction. The bright brass finish identifies the lock visually in the shop or on the job, which can simplify keying and hardware selection. Disc tumbler cam lock construction provides a defined keying format compatible with the specified stock keying options KA and KD, supporting keyed-alike or keyed-different schemes at planning time. The C8060-3 MK KD designation ties this cam lock to the SAP description, helping buyers align it with project documentation.
The 1-3/4 inch cylinder in this CompX National disc tumbler cam lock works in applications where the combined thickness of front and frame cannot exceed the cylinder length, so the installer can select fronts and frames that keep the threaded portion accessible for tightening. Stop washers provided for both 90 or 180 degree cam turns set the actual rotation, allowing the cam to align with strikes or frames at the angle needed for that cabinet layout. The specified cams for lipped or overlay construction and for flush construction give two extension patterns, so installers can choose the straight or formed cam layout that best lines up with their door or drawer clearances.
This CompX National disc tumbler cam lock is described for drawers and right-hand or left-hand doors, making it suitable for typical cabinet casework where access control is needed at the front. The cylinder length of 1-3/4 inch combined with the note that the combined thickness of front and frame cannot exceed the cylinder length ties it directly to medium-thickness cabinet fronts with frames behind them. Cams supplied for lipped or overlay construction use a straight cam with 1-1/2 inch extension, which places the locking surface farther out to reach over the lip or overlay to the strike surface. Cams for flush construction use a formed cam with 1-1/8 inch extension and 11/32 inch offset, positioning the cam closer in and offset so it can catch the frame behind a flush door or drawer front. Stock keying options KA and KD described in the stock keying notes define whether all locks are keyed alike to a specified key number or keyed different with various lock numbers, which helps organize how access is shared or separated across multiple cabinets.
The availability of 90 and 180 degree CW and CCW rotation, set using the two stop washers, lets the installer match cam travel to the strike location, reducing over-travel and helping the cam land squarely behind a frame member. Having rotation available in both clockwise and counterclockwise directions supports different mounting orientations, so the same C8060-MKKD-3 lock can be oriented to throw the cam toward the hinge side or away from it as the cabinet design requires. The straight cam with 1-1/2 inch extension and the formed cam with 1-1/8 inch extension and 11/32 inch offset provide two mechanical reach options, which helps align the locking tab with frames or strikes in both overlay and flush situations without reworking the door. The key removable in both locked and unlocked positions changes user workflow by allowing keys to be withdrawn after locking or after unlocking, which can streamline routines where multiple compartments are serviced in succession. The KA stock keying option, defined as all keyed alike to a specified key number with no master key function, allows groups of locks to share a single key number, which can simplify key control where a shared access pattern is desired. The KD stock keying option, defined as all keyed different with various lock numbers, supports installations where each lock operates on its own key, separating access between compartments. The SAP description C8060-3 MK KD connects the lock to internal ordering and project records, helping shops match the exact keying and cylinder style to project specs across reorders.
This CompX National disc tumbler cam lock is described for drawers and right-hand or left-hand doors, so it fits typical cabinet fronts where a cylinder-operated cam engages the frame.
The 1-3/4 inch cylinder length works when the combined thickness of front and frame does not exceed that length, allowing the lock body to clamp the assembly securely.
The straight cam with 1-1/2 inch extension suits lipped or overlay construction, while the formed cam with 1-1/8 inch extension and 11/32 inch offset suits flush construction.
The two stop washers allow 90 or 180 degree rotation so the cam can be set for shorter or longer travel, helping it catch the frame at a practical angle.
Stock keying KA means all locks are keyed alike to a specified key number with no master key, while KD means all locks are keyed different with various lock numbers.
Key removable in both locked and unlocked positions lets users pull the key after locking or after unlocking, which can speed up work when servicing multiple cabinets.
The CompX National disc tumbler cam lock C8060-MKKD-3 brings a 1-3/4 inch cylinder, bright brass finish, and selectable 90 or 180 degree CW and CCW rotation to drawer and cabinet door applications, so one lock type can serve varied casework. With cams described for lipped or overlay construction and for flush construction, plus KA and KD stock keying options, this lock aligns with common cabinet build-ups and access plans. Use these verified details to match cylinder length, cam reach, and keying format to the specific drawers and doors in your next project.
Sold In: 1 Each
