CompX National Disc Tumbler Cam Lock with 1-7/16" Cylinder, 3/4" Mounting Hole Antique Brass C8075-C415A-4G

CompX National Disc Tumbler Cam Lock For Cabinets

CompX National disc tumbler cam lock is a cylinder lock designed for drawers and right-hand or left-hand doors, so it covers common cabinet locking points on a job. The 1-7/16 inch cylinder length works where extra reach through the front and frame is required, helping the lock engage properly in thicker constructions. A 3/4 inch mounting hole size defines the bore you prepare in the panel, which streamlines layout when you are drilling multiple fronts. The antique brass finish provides a traditional appearance that matches similar cabinet hardware finishes, keeping projects visually consistent. This cam lock is part of the CompX National cam lock line, giving it a familiar form factor for repeat installs across shops using the same family of products.

Key Cam Lock Details That Support Your Work

• Each lock has two stop washers that allow the cam to turn either 90 degrees or 180 degrees based on the application, so you can match the rotation to how the door or drawer needs to secure.
• The lock is specified for drawers and both right-hand and left-hand doors, which simplifies hardware standardization across a mixed run of cabinets.
• Cams are described for lipped or overlay construction with a straight cam and 1-1/2 inch extension, giving reach suited to those face configurations.
• Cams are also described for flush construction with a formed cam, 1-1/8 inch extension, and 11/32 inch offset, helping the cam sit correctly behind a flush front.
• Key removable in both locked and unlocked positions means the key does not have to stay in the cylinder, which can speed up staging when setting multiple locks.
• Stock keying is defined as KA for all keyed alike to a specified key number, or KD for all keyed different with various lock numbers, supporting either unified or varied key control across a project.

Cam Lock Mounting And Fit For Cabinet Jobs

The 3/4 inch mounting hole requirement tells you the exact bore size to drill in doors or drawer fronts, which keeps the cylinder fitting tight without extra play. The cylinder length is referenced directly in relation to overlay applications, so the 1-7/16 inch cylinder is intended to handle installations where the combined thickness of front and frame must stay within that length for proper engagement. The note that this model is for drawers and both right-hand and left-hand doors shows it is suited to typical cabinet layouts without needing different lock types per opening. Antique brass as the finish also ties into existing decorative hardware choices, which can be important when the lock body is visible from the front.

Using This Antique Brass Cam Lock In Practice

Where This Cam Lock Fits In Cabinet Construction

This cam lock is described for use on drawers and on both right-hand and left-hand doors, so it fits standard cabinet and casework layouts in shops handling storage units, furniture, or built-ins. The cylinder length of 1-7/16 inches is highlighted in relation to overlay use, which means it suits fronts and frames whose combined thickness falls within that reach so the cam can capture the strike area. A 3/4 inch mounting hole specification sets the drilling operation, which is helpful when laying out repetitive bores in production runs. Cams are detailed for lipped or overlay construction with a straight cam, 1-1/2 inch extension, and for flush construction with a formed cam, 1-1/8 inch extension, and 11/32 inch offset, so the same lock system addresses different cabinet front styles.

Details That Support Repeatable Locking Results

The presence of two stop washers that allow either 90 degree or 180 degree cam turns gives control over how far the cam travels, which affects how the door or drawer feels when locking and unlocking. Having key removable in both locked and unlocked positions supports installing and operating several locks in sequence without leaving keys hanging, which can streamline site work or shop assembly. The reference to KA keying, where all locks are keyed alike to a specified key number and a master key will not work on these locks, defines a setup suited to shared-key environments where one pattern serves all openings. The KD keying reference, where all locks are keyed different with various lock numbers, points toward jobs needing separate access control per opening. Stock keying being specified in this way lets you align lock selection to how the finished space will be managed.

Common Questions About The C8075-C415A-4G Cam Lock

Select This Cam Lock For Cabinet Security Needs

The CompX National disc tumbler cam lock with 1-7/16 inch cylinder and 3/4 inch mounting hole brings defined dimensions and cam options to drawers and right-hand or left-hand doors. With rotation choices of 90 degrees or 180 degrees from its stop washers, and cam descriptions covering lipped or overlay construction and flush construction, its setup aligns closely to how cabinet fronts are built. KA and KD stock keying definitions tie lock selection to access patterns on the project. For cabinet work that calls for an antique brass finish and a known cylinder format, this C8075-C415A-4G model fits directly into that role.