CompX National Disc Tumbler Cam Lock with 1-3/16" Cylinder, 90and 180 degree CW and CCW Rotation, Bright Nickel C8073-C420A-14A

CompX National Disc Tumbler Cam Lock For Casework

CompX National disc tumbler cam lock with 1-3/16 inch cylinder is built for drawers and right-hand or left-hand doors, so one lock style can serve multiple cabinet layouts in the same project. The bright nickel finish on this cam lock provides a clean, professional look that visually matches common cabinet hardware. The lock offers 90 and 180 degree clockwise and counterclockwise rotation, giving flexibility to position the cam exactly where the door or drawer needs to land. Each lock uses a disc tumbler mechanism, providing defined keying options that support keyed alike or keyed different setups from the manufacturer. The key is removable in both locked and unlocked positions, allowing the key to be taken away after securing or opening, which helps keep access controlled while work continues.

Cam Lock Details That Support Cabinet Workflows

• Two stop washers allow the cam to turn either 90 or 180 degrees based on application, so the installer can match the swing to door reveals or drawer clearances without changing lock bodies.
• Design for drawers and for right-hand or left-hand doors lets one part number cover multiple orientations, simplifying planning and reducing the need to stock different lock types for similar cabinet runs.
• Cams for lipped or overlay construction and for flush construction give options for 1-1/2 inch straight cam extension or 1-1/8 inch formed cam extension with 11/32 inch offset, helping match the lock throw to face and frame relationships.
• For overlay applications the combined thickness of front and frame cannot exceed the cylinder length, which helps determine when this 1-3/16 inch cylinder is appropriate for the cabinet build-up.
• Key removable in both locked and unlocked positions lets users take the key away after operating the lock, supporting controlled access in shops, offices, or storage areas that see frequent use.
• Stock keying options from the manufacturer provide KA keyed alike setups or KD keyed different setups, supporting projects that need common access or unique keys across multiple cabinets.

Cam Lock Fit, Cylinder Length, And Application Limits

This cam lock uses a 1-3/16 inch cylinder length, and for overlay applications the combined thickness of the cabinet front and frame cannot exceed that cylinder length, so this dimension directly determines whether the lock will seat correctly in a given door or drawer front. For a typical overlay using a 3/4 inch front and a 3/4 inch frame, the product information specifies using the NLC8073 lock and the NLC7014-2C cam, which guides selection when the build-up reaches that thickness. The cams supplied for either lipped or overlay construction and for flush construction provide 1-1/2 inch straight cam extension or 1-1/8 inch formed cam extension with 11/32 inch offset, so the fitter can match the cam throw to the cabinet geometry without altering the door or drawer design.

Using This Bright Nickel Cam Lock In Real Projects

Where This Cam Lock Serves Drawers And Doors

This bright nickel cam lock is specified for drawers and for right-hand or left-hand doors, so it can be used across casework runs that mix sliding and swinging fronts. The cams listed for lipped or overlay construction use a straight cam with 1-1/2 inch extension, which lets the cam reach behind overlay fronts on suitable thicknesses. For flush construction, the formed cam with 1-1/8 inch extension and 11/32 inch offset steps behind the door or drawer edge, helping the cam catch the strike area on face-frame or panel interiors. The 90 and 180 degree clockwise and counterclockwise rotation capability allows the installer to orient the cam horizontally or vertically around the cylinder, so the same lock can secure doors that close to different jamb or frame locations.

Rotation, Keying, And Workflow Consistency

The two stop washers allow either 90 or 180 degree cam turns, so the rotation arc can be set to limit handle travel on tight clearances or to provide a longer throw when needed. This control over rotation helps prevent the cam from striking interior components while still achieving reliable engagement. The key removable in both locked and unlocked positions supports workflows where users want to unlock a run of cabinets, remove the key, and work without it hanging from the lock, then later relock and again remove the key. Stock keying options from the table described in the product information define KA keyed alike setups, where all locks use the same key number and a master key will not work on them, and KD keyed different setups, where locks use various lock numbers, so planners can assign common or unique access zones across a shop or office layout. Unassembled REMOVACORE versions are available, which ties into installations that favor removable core systems for future keying changes while keeping the same hardware footprint in the cabinet.

Common Questions About The C8073-C420A-14A Cam Lock

Select This Bright Nickel Cam Lock For Targeted Jobs

The CompX National disc tumbler cam lock with 1-3/16 inch cylinder, 90 and 180 degree rotation, and bright nickel finish offers defined functions for drawers and for right-hand or left-hand doors. Using the provided rotation choices, cylinder length detail, and cams for lipped or overlay and flush construction, installers can match this C8073-C420A-14A lock to cabinet fronts and frames where those dimensions and motions align with the job requirements.