CompX National Disc Tumbler Cam Lock For Cabinets

CompX National disc tumbler cam lock describes a cam lock with a 1-3/16 inch cylinder that rotates 90 or 180 degrees clockwise and counterclockwise, so it suits common drawer and cabinet door locking layouts on shop and jobsite builds. The bright nickel finish identifies the CAM LOCK, BRIGHT NICKEL C8073-C415A-14A version, which helps match other bright cabinet hardware in the same project. The lock is listed for drawers and for right-hand or left-hand doors, so one part number covers multiple door swing directions. Key removable in both locked and unlocked positions allows the key to be taken out after locking or after reopening, which supports cabinets that need frequent access without leaving a key hanging. Stop washers allow 90 degree or 180 degree cam turns, so the installer can match the rotation to the strike position on the cabinet.

Cam Lock Details That Support Real Cabinet Work

• The 1-3/16 inch cylinder length defines how thick the front and frame can be in overlay applications, which lets the installer select this lock when the combined thickness fits within that dimension.
• Cams for lipped or overlay construction use a straight cam with 1-1/2 inch extension, so the throw can reach past a lip or frame to engage the strike area on the cabinet.
• Cams for flush construction use a formed cam with 1-1/8 inch extension and 11/32 inch offset, so the offset helps the cam line up with the mating surface on flush doors or drawer fronts.
• Use on drawers or right-hand or left-hand doors means the same cam lock part can be applied across multiple cabinet sections, which simplifies planning when laying out a bank of doors and drawers.
• Stock keying options KA or KD are specified for this model, so a project can be set up with either all locks keyed alike or all locks keyed different according to the keying table.

Cam Lock Fit, Cylinder Length, And Rotation Setup

The 1-3/16 inch cylinder length of this CompX National cam lock sets the limit for combined front and frame thickness in overlay construction, so installers match the door build-up to that dimension when they select the lock. For overlay applications using a 3/4 inch front and a 3/4 inch frame, the product notes direct users to the NLC8073 lock and NLC7014-2C cam, which shows how this cylinder length relates to thicker overlay combinations. Two stop washers allow the cam to turn either 90 degrees or 180 degrees, clockwise or counterclockwise, so rotation can be configured to match the strike location and handle orientation. Key removable in both locked and unlocked positions simplifies operating the lock whether the cabinet is being secured or accessed frequently.

Using This Bright Nickel Cam Lock In Cabinets

Where This C8073-C415A-14A Cam Lock Is Applied

This bright nickel C8073-C415A-14A cam lock is designated for drawers and for right-hand or left-hand doors, so it fits typical cabinet boxes in shops, offices, and built-ins where doors swing either way. Cams are specified for both lipped or overlay construction and flush construction, with a straight cam providing a 1-1/2 inch extension and a formed cam providing a 1-1/8 inch extension plus 11/32 inch offset, so the lock can be configured to engage strikes on both overlay and flush fronts. The note that the combined thickness of front and frame in overlay applications cannot exceed the cylinder length reinforces that this lock is intended for constructions that stay within the 1-3/16 inch range.

Rotation, Keying Options, And Workflow Advantages

The cam lock uses two stop washers to provide either 90 degree or 180 degree cam turns, so the installer can select shorter or longer throws to match how far the cam needs to travel to secure the door or drawer. Rotation is described as clockwise and counterclockwise, so the same lock body can be oriented to work with different door swings without changing the core mechanism. Key removable in both locked and unlocked positions affects daily workflow because users can lock a cabinet, remove the key, and later unlock and again remove the key, reducing time spent handling keys during repeated access. Stock keying options noted as KA (all keyed alike to a specified key number) or KD (all keyed different with various lock numbers) give project planners flexibility, since keyed alike setups simplify access across multiple doors while keyed different setups separate access points.

Common Buyer Questions About This Cam Lock

Selecting This Bright Nickel Cam Lock For Your Job

This bright nickel CompX National disc tumbler cam lock with a 1-3/16 inch cylinder, configurable 90 or 180 degree rotation, and cams for both overlay and flush construction gives installers a single part suited to drawers and right- or left-hand doors. When the cabinet front and frame thickness align with the specified cylinder length and the cam extensions match the desired reach, this C8073-C415A-14A model offers a practical cam lock choice for woodworking and cabinet projects.