CompX National Disc Tumbler Cam Lock, 1-3/4" Cylinder with 90 and 180 Degree CW and CCW Rotation, Bright Brass C8060-C346A-3
Description
Cam Lock Bright Brass For Drawers And Doors
CAM LOCK BRIGHT BRASS describes a CompX National disc tumbler cam lock with a 1-3/4 inch cylinder that controls drawers and right-hand or left-hand doors, so one SKU can cover multiple cabinet orientations in the shop or on site. The disc tumbler mechanism forms the locking core, providing a defined keying system that aligns with standard CompX National practice for keyed alike or keyed different setups across a project. Bright brass finish identifies the lock visually on the cabinet face, which helps match existing brass hardware runs in casework. The 1-3/4 inch cylinder length sets the usable door or drawer front and frame thickness window, so installers can plan face and frame build-ups to match the specified cylinder. Manufacturer part number C8060-C346A-3 ties this lock directly to CompX National documentation for future reorders or keying coordination.
Key Cam Lock Details That Support Cabinet Work
- Each lock is supplied with two stop washers that allow the cam to turn either 90 degrees or 180 degrees clockwise or counterclockwise, so the installer can set the rotation that matches door swing or drawer travel without changing the basic lock body.
- The lock is specified for drawers and for right-hand or left-hand doors, which means the same cam lock can be applied across mixed casework layouts instead of stocking separate models for different cabinet orientations.
- Cams are specified for lipped or overlay construction using a straight cam with 1-1/2 inch extension, so the cam reach can clear the lip and catch the frame reliably on overlay cabinet builds.
- Cams are also specified for flush construction using a formed cam with 1-1/8 inch extension and 11/32 inch offset, so the cam can engage behind a flush door or drawer front while maintaining a consistent latch point.
- Key removable in both locked and unlocked positions describes a core that lets the installer or user pull the key after locking or after opening, which can simplify key handling on multi-user cabinets or service access points.
- The web description notes that stop washers are provided for both 90 degree or 180 degree cam turns, reinforcing that the rotation choice is built into the lock kit and can be configured during the install to suit the cabinet design.
Cam Lock Fit, Cylinder Length, And Construction Details
The 1-3/4 inch cylinder length on this CompX National disc tumbler cam lock defines how much combined front and frame thickness it can span in an overlay application, so cabinet fronts and frames can be built or selected to stay within that dimension. The web description states that for overlay application, the combined thickness of front and frame cannot exceed the cylinder length listed, giving a clear thickness limit when laying out 3/4 inch fronts or face frames. A note adds that to accommodate an overlay construction using a 3/4 inch front and a 3/4 inch frame, the NLC8073 lock and the NLC7014-2C cam are the specified combination, so this C8060-C346A-3 model is aimed at different thickness builds. This relationship between cylinder length and construction style lets installers pick the correct lock model relative to their door section design.
Using This C8060-C346A-3 Cam Lock In Cabinet Projects
Where This Disc Tumbler Cam Lock Is Applied
This CompX National disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so it fits common casework like cabinet doors, small access panels, and storage drawers that need a keyed lock point. The cams called out in the description support lipped or overlay construction using a straight cam with 1-1/2 inch extension, which addresses doors or drawers that overlap the frame and require a longer reach to latch behind the frame edge. For flush construction, a formed cam with 1-1/8 inch extension and 11/32 inch offset is referenced, positioning the cam to catch behind a flush front without needing extra spacers. The ability to rotate the cam either 90 degrees or 180 degrees clockwise or counterclockwise using the supplied stop washers means the same lock body can be tuned to shallow or full-throw applications, such as short-throw drawer cams or longer rotation door latches within a cabinet run.
Why Rotation, Offset, And Key Removal Matter
The option to set 90 degree or 180 degree rotation through the stop washers lets the installer match cam travel to the hardware geometry, so the cam can clear strikes or frames without over-travel that might stress the door edge. Being able to rotate clockwise or counterclockwise allows the cam to close against a strike or frame on either side, which is useful when cabinet layouts force the door to hinge on the left or right while still using the same lock model. The 1-1/2 inch straight cam extension for lipped or overlay construction provides the reach to grab behind thicker or overhanging faces, helping the lock maintain engagement even when the front overhangs the case. The 1-1/8 inch formed cam with 11/32 inch offset creates a stepped profile that lines up with flush fronts, so the latch point sits in the right plane without reworking the door. Key removable in both locked and unlocked positions helps in workflows where users need to remove the key after locking for security, or leave the cabinet unlocked but still keep the key out of the cylinder to prevent breakage during work around the cabinet.
Common Questions About This CompX National Cam Lock
What type of cam lock is the C8060-C346A-3?
The C8060-C346A-3 is a CompX National disc tumbler cam lock with a 1-3/4 inch cylinder, so it uses a disc tumbler mechanism and a defined cylinder length for cabinet layouts.
Where can this bright brass cam lock be used?
This bright brass cam lock is specified for drawers and for right-hand or left-hand doors, so it suits typical cabinet doors and storage drawers needing keyed control.
How does the 1-3/4 inch cylinder length affect installation?
The 1-3/4 inch cylinder length sets the maximum combined front and frame thickness in overlay applications, so door and frame sections must fall within that depth.
What rotation options does this cam lock provide?
This cam lock uses stop washers that allow 90 degree or 180 degree rotation clockwise or counterclockwise, so cam travel can be matched to drawer or door movement.
How do the different cams support lipped or flush construction?
The straight cam with 1-1/2 inch extension serves lipped or overlay construction, while the formed cam with 1-1/8 inch extension and 11/32 inch offset aligns with flush fronts.
Why is key removable in both locked and unlocked positions useful?
Key removable in both locked and unlocked positions allows the key to be taken out after securing or opening, which can simplify key control on shared cabinets.
Selecting This Cam Lock Bright Brass For Your Cabinets
This CAM LOCK BRIGHT BRASS from CompX National pairs a 1-3/4 inch cylinder with cams for lipped, overlay, and flush constructions, so it can match a range of cabinet builds. The ability to configure 90 degree or 180 degree clockwise or counterclockwise rotation with the stop washers gives flexibility across door and drawer layouts. For projects calling for keyed drawer or door control in a bright brass finish and using the C8060-C346A-3 specification, this cam lock offers the defined cylinder length and rotation options needed to line up with the casework design.
