CompX National Disc Tumbler Cam Lock with 1-3/16" Cylinder, 90and 180 degree CW and CCW Rotation, Bright Nickel C8073-C413A-14A

CompX National Disc Tumbler Cam Lock For Cabinets

CompX National disc tumbler cam lock with 1-3/16 inch cylinder is a compact lock that secures drawers and right-hand or left-hand doors using a rotating cam, giving cabinet builders a familiar format that works across typical casework layouts. The lock uses a disc tumbler mechanism, which provides a defined keying system for keyed alike or keyed different setups, helping shops standardize key control across multiple cabinets. A bright nickel finish on the lock body presents a clean metal surface that matches common cabinet hardware finishes, which helps projects maintain a consistent look. The cylinder length is designed so the combined thickness of front and frame for overlay applications cannot exceed the listed 1-3/16 inch cylinder length, which guides material selection when planning overlay fronts. This lock operates with both clockwise and counterclockwise cam rotation, supporting various cabinet orientations.

Cam Lock Details That Support Real-World Builds

• Two stop washers allow 90 or 180 degree cam turns, so the rotation can be set to short-throw or full-throw travel to match the required latch motion on the cabinet.
• Design for drawers and both right-hand and left-hand doors lets one lock family cover multiple cabinet types, simplifying hardware choices across a job.
• Cams for lipped or overlay construction and flush construction give options for straight or offset engagement so the cam can reach the strike point in different cabinet builds.
• The straight cam with 1-1/2 inch extension works with lipped or overlay projects where additional reach is needed from the cylinder center to the strike surface.
• The formed cam with 1-1/8 inch extension and 11/32 inch offset serves flush construction where an offset bend helps the cam clear the front while still catching the frame.
• Key removable in both locked and unlocked positions allows the same key to be taken out after locking or after reopening, which streamlines key handling during service work.

Cam Lock Installation And Cylinder Fit Considerations

The 1-3/16 inch cylinder length on this CompX National cam lock sets the maximum combined thickness of front and frame for overlay applications, so cabinet parts are sized to allow full thread engagement on the mounting nut. Two stop washers in the design provide positioning for 90 degree or 180 degree cam turns, which lets the installer orient the rotation arc so the cam clears cabinet parts while still landing on the frame. Cams built for lipped or overlay fronts and flush fronts give defined options for how far the cam extends from the cylinder centerline, which keeps the lock body in the standard bore while the cam reaches back to the cabinet structure. A spur washer for wood adds tooth engagement to the substrate to resist rotation, which helps the cylinder stay aligned over time.

How This C8073-C413A-14A Cam Lock Works In Practice

Using The Cam Lock On Drawers And Doors

This CompX National disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so the same part number can be applied across common cabinet fronts in a shop or on site. The bright nickel finish presents a neutral metallic look around the cylinder face, which blends with many hinges and pulls on typical casework. With cams available for lipped or overlay fronts and for flush construction, the lock can be placed in the standard cylinder bore while the cam geometry takes care of reaching behind the front. The straight cam with 1-1/2 inch extension fits applications where the frame sits deeper from the front, while the formed cam with 1-1/8 inch extension and 11/32 inch offset supports flush fronts where an offset profile is needed to engage the frame cleanly.

Rotation, Keying Options, And Workflow Impact

The two stop washers on this C8073-C413A-14A cam lock provide the choice of 90 degree or 180 degree rotation in either clockwise or counterclockwise directions, allowing the cam throw to be matched to the required latch travel without changing the cylinder. Key removable in both locked and unlocked positions means the key can be withdrawn after securing a door or after reopening it, which helps when multiple locks are being serviced in sequence. Stock keying can be set as keyed alike to a specified key number, where one key pattern operates all such locks and a master key does not operate them, supporting simple key control for grouped cabinets. Stock keying can also be set as keyed different with various lock numbers, where each lock has its own key, which is useful when separation between storage areas is required.

Common Questions About This Bright Nickel Cam Lock

Selecting This Cam Lock For Your Cabinet Work

The CompX National disc tumbler cam lock with 1-3/16 inch cylinder, bright nickel finish, and C8073-C413A-14A part number aligns with drawers, right-hand doors, and left-hand doors using overlay or flush construction. Defined cam lengths, offset geometry, and selectable 90 or 180 degree rotation give flexibility in how the cam reaches and engages the frame. Key removable in both locked and unlocked positions, plus keyed alike or keyed different stock keying choices, provide options for how access is managed. For cabinet and casework projects that need a disc tumbler cam lock with these rotation and construction options, this model offers a focused, job-ready solution.