CompX National Disc Tumbler Cam Lock, 1-3/4" Cylinder with 90 and 180 Degree CW and CCW Rotation, Bright Nickel C8060-C415A-14A

CompX National Disc Tumbler Cam Lock For Cabinets

CompX National disc tumbler cam lock provides keyed control for drawers and right-hand or left-hand doors, so one lock style works across common cabinet layouts. The 1-3/4 inch cylinder length supports applications where front and frame thickness must stay within that dimension, which matters when planning cabinet construction around the lock. Bright nickel finish gives a clean, consistent appearance that coordinates with other nickel hardware in a project. The lock offers 90 and 180 degree clockwise and counterclockwise rotation, letting you match cam travel to how the door or drawer closes. Key removable in both locked and unlocked positions supports workflows where operators need to remove the key regardless of lock state. Stock keying can be ordered keyed alike or keyed different, allowing shops to standardize or separate access across installations.

Cam Lock Details That Support Cabinet Jobs

• 90 and 180 degree clockwise and counterclockwise cam rotation lets you choose short or long throw in either direction, which helps align the cam with strikes on different door or drawer layouts.
• Two stop washers allow the cam to turn either 90 or 180 degrees based on application, so the installer can set rotation limits to prevent overtravel and keep movement consistent across multiple cabinets.
• Cams for lipped or overlay construction provide a straight cam with 1-1/2 inch extension, giving reach for overlay fronts where the lock must catch behind a frame or keeper.
• Cams for flush construction provide a formed cam with 1-1/8 inch extension and 11/32 inch offset, positioning the cam correctly for inset faces where the locking point sits closer to the front.
• Key removable in both locked and unlocked positions allows operators to remove the key after locking or unlocking, which is useful where keys are controlled separately from the cabinet user.
• Stock keying options of keyed alike or keyed different support either shared access across multiple locks or unique keys for individual locations, matching how a shop manages security.

Cam Lock Installation And Fit Considerations

The 1-3/4 inch cylinder length sets the maximum combined thickness of the front and frame in overlay applications, which affects how you design or select door and frame materials around this lock. For overlay construction using a 3/4 inch front and 3/4 inch frame, the manufacturer specifies using the NLC8073 lock with the NLC7014-2C cam, indicating that this C8060-C415A-14A model fits different overlay thickness requirements. A spur washer is provided for wood applications, so the lock body can bite into the panel and resist rotation during use. A trim washer and mounting nut secure the cylinder from the front and rear faces, creating a clamped assembly that holds position under repeated locking cycles.

Using This Cam Lock In Cabinet And Drawer Work

Where This C8060-C415A-14A Cam Lock Fits

This CompX National cam lock is specified for drawers and for right-hand or left-hand doors, so it can be applied across a run of mixed casework without switching lock families. Bright nickel finish presents well on cabinetry where visible hardware matters in finished installations. The cams supplied cover both lipped or overlay construction with the straight cam and flush construction with the formed cam, so the same lock body supports different face conditions. In overlay applications, the combined front and frame thickness must not exceed the 1-3/4 inch cylinder length, which keeps the cam within working reach of the strike or frame. For an overlay layout with a 3/4 inch front and 3/4 inch frame, the manufacturer directs use of the NLC8073 lock and NLC7014-2C cam, so this C8060-C415A-14A model aligns better with other thickness combinations.

Rotation, Keying, And Setup For Repeatable Results

The lock offers 90 and 180 degree clockwise and counterclockwise rotation with stop washers that set the chosen angle, allowing you to tune the cam throw to how far the cam must travel to secure the door or drawer. Being able to configure either 90 degree or 180 degree movement helps coordinate handle feel and latch engagement across a bank of cabinets. Key removable in both locked and unlocked positions simplifies handoff, since users can remove the key after locking for security, or after unlocking when the key is managed by staff. Stock keying defined as keyed alike to a specified key number or keyed different with various lock numbers lets a project standardize one key across many locks or separate access by location. This flexibility supports both single-user installations and larger facilities with tiered access where different areas require their own key sets.

Common Questions About This Cam Lock Setup

Selecting This Cam Lock For Your Next Project

This CompX National disc tumbler cam lock combines a 1-3/4 inch cylinder, bright nickel finish, and configurable 90 or 180 degree rotation, fitting many drawer and door layouts. With cams for lipped or overlay and flush construction, it adapts to different cabinet face conditions. Key removable in both locked and unlocked positions and flexible keyed alike or keyed different stock keying support how a shop manages access. For projects needing a consistent cam lock solution across casework, this C8060-C415A-14A model offers a defined set of options to match construction details.