Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX National disc tumbler cam lock with 1-7-16 cylinder, 3-4 inch mounting hole bright nickel C8075-C346A-14A is a disc tumbler cam lock designed for typical cabinet and casework locations, so it secures common storage points with a familiar footprint. The 1-7-16 inch cylinder length provides reach through typical front thicknesses, which lets the lock engage properly without crowding hardware on the inside of the cabinet. The 3-4 inch mounting hole specification defines the bore size, so drilling or boring operations can be set up accurately on the bench. A bright nickel finish identifies the lock visually and matches many bright nickel hardware lines, which keeps the hardware appearance consistent across a project. The manufacturer part number C8075-C346A-14A ties this lock to CompX National specifications, which helps match future replacements or coordinate keying plans across jobs.
This cam lock uses a 3-4 inch mounting hole, so the same bore size can be repeated consistently on jigs or production runs. The 1-7-16 inch cylinder length sets the available stack-up for fronts and frames, which helps the installer match the lock to jobs where the combined material in an overlay application must stay within that cylinder length. The cam options are specified for lipped or overlay and for flush construction, so the same lock body can be matched with the appropriate cam style during layout. A trim washer and spur washer for wood are specified, so the escutcheon sits cleanly on the face while the spur washer helps resist rotation in wooden panels.
This cam lock is specified for drawers and for right-hand or left-hand doors, so it suits typical base cabinets, wall cabinets, and storage cases where swing direction varies. The 3-4 inch mounting hole requirement gives a clear drilling dimension, which helps when setting up line boring or drill press fixtures for repeat installations. For overlay or lipped construction, the straight cam with 1-1-2 inch extension is provided to reach behind the front and engage a frame or strike area, so the locking point stays solid even when the front projects. For flush construction, the formed cam with 1-1-8 inch extension and 11-32 inch offset aligns the cam with a flush frame surface, so the cam can catch reliably without bending or improvising hardware in the field.
The disc tumbler design defines the internal locking mechanism, which keeps the cam action compatible with standard CompX National keying practices across multiple cabinets. Stock keying options described as KA for all keyed alike to a specified key number or KD for all keyed different with various lock numbers allow the installer or planner to match a project keying scheme to site requirements without changing the physical lock footprint. Stop washers that permit either 90 or 180 degree cam rotation provide two clear operating patterns, so the installer can position the cam to lock on a vertical or horizontal strike, reducing rework if the door or drawer configuration changes. Key removable in both locked and unlocked positions means the user can either leave the key out after securing the cabinet or operate with the key removed during normal access, which supports different access routines in workshops, offices, or retail fixtures. The bright nickel finish keeps the visible cylinder consistent with bright nickel cabinet hardware, so finished installations present a unified appearance on doors and drawers.
The C8075-C346A-14A cam lock is specified for drawers and for right-hand or left-hand doors, so it is suited to typical cabinet and casework layouts with varying swing directions.
This CompX National disc tumbler cam lock uses a 3-4 inch mounting hole, which sets the bore size for drilling jigs and ensures the cylinder seats properly in the panel.
The 1-7-16 inch cylinder length defines the total thickness the lock can span, so cabinet fronts and any frame buildup in overlay applications must stay within that dimension.
This cam lock uses a straight cam with 1-1-2 inch extension for lipped or overlay construction and a formed cam with 1-1-8 inch extension and 11-32 inch offset for flush construction.
The bright nickel cam lock uses two stop washers that allow either 90 or 180 degree cam rotation, so the installer can match the throw angle to the strike location.
This disc tumbler cam lock allows the key to be removable in both locked and unlocked positions, which supports different site key handling routines.
The CompX National disc tumbler cam lock with 1-7-16 inch cylinder and 3-4 inch mounting hole bright nickel C8075-C346A-14A combines defined drilling dimensions with cams for overlay and flush construction, so it adapts to common cabinet builds. Stop washers that allow 90 or 180 degree cam turns, together with use on drawers and right-hand or left-hand doors, give flexibility across layouts. When a project calls for a bright nickel cam lock that aligns with CompX National keying and cabinet hardware, this model provides a clearly specified option ready to integrate into cabinet, fixture, or casework runs.
Sold In: 1 Each
