Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX National disc tumbler cam lock with 1-3/16 cylinder gives you a compact locking solution that fits typical cabinet fronts while providing enough cylinder length for many drawer and door constructions. The bright brass finish creates a consistent look with brass hardware across casework runs. This lock is designed for drawers as well as right-hand or left-hand doors, so one part number serves multiple cabinet layouts on the same job. It offers 90 and 180 degree clockwise and counterclockwise rotation, giving flexibility to position the cam where it clears frames, partitions, or nearby hardware. The cylinder is part of the CompX National family, aligning with common keying options used in woodworking and fixture projects. Stock keying options let you select keyed alike or keyed different setups to suit how you want to group access on a project.
The 1-3/16 inch cylinder length on this cam lock supports front-and-frame thickness combinations up to that length for overlay applications, keeping the threaded section long enough to secure through stacked materials. For overlay constructions using a 3/4 inch front and 3/4 inch frame, the product information specifies ordering the NLC8073 lock with the NLC7014-2C cam to accommodate that thicker build, which clarifies how this C8073-C415A-3 version is sized within the series. Two stop washers are provided so you can configure the cam for either 90 or 180 degree rotation in clockwise or counterclockwise directions, which helps when aligning the cam throw to cabinet clearances or user preference. This rotation flexibility allows the same lock body to serve multiple orientations in casework layouts.
This CompX National cam lock is specified for drawers and for right-hand or left-hand doors, so it can be used in vertical or horizontal orientations across a run of cabinets. For lipped or overlay construction, the straight cam with 1-1/2 inch extension lets the cam reach past the lip to catch the cabinet side or frame, which is important where the front overhang would otherwise block a shorter cam. For flush construction, the formed cam with 1-1/8 inch extension and 11/32 inch offset steps the contact point to align with a strike surface sitting farther inboard, which helps achieve reliable locking on flat-front casework. The 1-3/16 inch cylinder length ties these applications together, giving a consistent barrel dimension while the cams handle the different geometries of lipped and flush designs.
This disc tumbler cam lock supports 90 and 180 degree rotation in both clockwise and counterclockwise directions through the supplied stop washers, so you can align the cam throw with the way the door or drawer swings and with nearby obstructions inside the cabinet. Key removable in both locked and unlocked positions means the user can remove the key while leaving the cabinet open or closed, which is practical in shop, office, or retail environments where doors are often left in a chosen state. Stock keying is defined so KA means all keyed alike to a specified key number, with a master key not operating those locks, which is useful where you want a group of cabinets sharing one key but isolated from a master system. KD means all keyed different with various lock numbers, supporting installations where each location requires its own key pattern for added separation. These keying definitions help match the lock choice to the access control plan on a project without changing the physical form factor.
The CompX National C8073-C415A-3 cam lock is designed for drawers and for right-hand or left-hand doors, so it can be used across typical cabinet and casework layouts.
The 1-3/16 inch cylinder length supports overlay applications where the combined thickness of the front and frame does not exceed that length, helping the lock clamp securely through the materials.
The lock uses stop washers to allow 90 or 180 degree rotation in either direction, so you can choose a shorter or longer cam throw to clear cabinet parts and reach the strike area.
The straight cam with 1-1/2 inch extension serves lipped or overlay construction, while the formed cam with 1-1/8 inch extension and 11/32 inch offset suits flush construction, aligning the cam with the strike surface.
Key removable in both locked and unlocked positions lets users remove the key whether the cabinet is secured or open, supporting workflows where the key should not stay in the cylinder.
On this lock, KA means all keyed alike to a specified key number and not operated by a master key, while KD means all keyed different with various lock numbers across the set.
The CompX National disc tumbler cam lock with 1-3/16 inch cylinder, bright brass finish, and cams for both lipped/overlay and flush construction gives a single part that addresses varied cabinet builds. Its 90 and 180 degree rotation options, use on drawers and left- or right-hand doors, and key removable in locked and unlocked positions support efficient use in woodworking, fixture, and cabinet projects. Choose this C8073-C415A-3 cam lock when you need a consistent cylinder size with clear keying options across multiple casework conditions.
Sold In: 1 Each
