CompX National Disc Tumbler Cam Lock, 1-3/4" Cylinder with 90 and 180 Degree CW and CCW Rotation, Bright Nickel C8060-C642A-14A

CompX National Disc Tumbler Cam Lock For Cabinets

CompX National disc tumbler cam lock gives you a 1-3/4 inch cylinder that secures drawers and right-hand or left-hand doors, so one lock style can be used across multiple cabinet layouts in the same project. The bright nickel finish identifies the cylinder visually and provides a clean appearance at the front, which helps match common bright cabinet hardware. The lock uses a disc tumbler mechanism, which provides defined keying options for keyed alike or keyed different setups, supporting consistent key control across installations. Manufacturer part number C8060-C642A-14A ties this lock to the CompX National system, which matters when matching cams and keying charts on future jobs. Stock keying is specified with KA for keyed alike or KD for keyed different, so you can coordinate which doors or drawers share keys and which stay separate.

Cam Lock Details That Support Real-World Use

• The 1-3/4 inch cylinder length manages applications where the combined thickness of front and frame must not exceed the cylinder length, so you can select it confidently for medium-depth cabinet fronts.
• Each lock uses two stop washers to allow either 90 degree or 180 degree cam rotation in clockwise or counterclockwise directions, which lets you orient the locking action to suit door swing and drawer motion.
• Cams are provided for lipped or overlay construction with a straight cam and 1-1/2 inch extension, giving reach across overlays so the cam can engage the strike or frame without extra parts.
• Cams are also provided for flush construction with a formed cam and 1-1/8 inch extension plus 11/32 inch offset, so the cam can step behind the frame on flush doors where the front and frame line up.
• The key is removable in both locked and unlocked positions, which allows users to take the key away after locking or keep the cylinder keyway clear while the lock remains open for regular access.

Cam Lock Fit, Rotation, And Cabinet Installation

This bright nickel cam lock is designed for drawers and for right-hand or left-hand doors, so the same component works on both sides of a cabinet run. The 1-3/4 inch cylinder length is suitable where the combined thickness of front and frame stays within that measurement, allowing the threaded body to seat correctly. Two stop washers let you set either 90 degree or 180 degree cam turns, and the cam can rotate clockwise or counterclockwise, which matters when aligning the cam with strikes or frames on differently hinged doors. A spur washer is provided for wood, giving the lock body teeth to bite into the panel so the cylinder resists turning during use, which helps maintain alignment of the cam over time.

Using This Bright Nickel Cam Lock In Practice

Where This Cam Lock Works Best In Cabinets

This CompX National disc tumbler cam lock is intended for drawers and cabinet doors in both right-hand and left-hand configurations, so it suits storage runs where orientation changes from opening to opening. The cylinder length of 1-3/4 inches supports installations where the combined thickness of the front and frame does not exceed that length, which is typical of many cabinet constructions using moderate door thickness and standard face frames. For lipped or overlay construction, the straight cam with 1-1/2 inch extension lets the locking tongue reach past the door overlay and engage the frame, which is important on overlay doors that sit proud of the case. For flush construction, the formed cam with 1-1/8 inch extension and 11/32 inch offset steps behind the frame, so the lock can capture a flush-mounted door without binding. The trim washer finishes the cylinder against the front surface, giving a defined shoulder that sits cleanly on the cabinet face when the mounting nut is tightened.

How Lock Details Support Rotation, Keying, And workflow

The bright nickel cam lock uses two stop washers so you can choose either 90 degree or 180 degree cam rotation in clockwise or counterclockwise directions, which lets you tune throw length to match the strike location and door or drawer travel. When a short throw is needed, the 90 degree setting brings the cam from open to fully behind the strike quickly, while the 180 degree option offers a longer swing where more clearance is available. Key removal in both locked and unlocked positions means the cylinder does not trap the key, so users can store keys away from the cabinet or leave the lock open without a key hanging from the face. Stock keying options KA and KD let you specify keyed alike groups where one key operates multiple locks, or keyed different groups where each opening has its own key number, which helps organize access levels in shops or offices. The threaded cylinder body works with the mounting nut and spur washer for wood to clamp firmly to the panel, so the cam maintains its alignment to the frame even under repeated operation.

Installer Questions About This Cam Lock Answered

Select This Cam Lock For Drawer And Door Security

The CompX National disc tumbler cam lock with 1-3/4 inch cylinder, bright nickel face, and 90 or 180 degree rotation options delivers a defined locking action for drawers and right-hand or left-hand doors. Straight and formed cams with specific extensions and offset let you address both lipped or overlay and flush cabinet constructions using the same lock body. KA and KD stock keying choices support either shared-key or individual-key layouts across a run of cabinets. Order the C8060-C642A-14A to match these dimensions, finishes, and rotation settings when planning your next cabinet locking setup.