CompX National Disc Tumbler Cam Lock, 1-3/4" Cylinder with 90 and 180 Degree CW and CCW Rotation, Antique Brass C8060-C415A-4G

CompX National Disc Tumbler Cam Lock For Cabinets

CompX National disc tumbler cam lock gives you keyed security for drawers and right-hand or left-hand doors using a single 1-3/4 inch cylinder. The 1-3/4 inch cylinder length supports applications where the combined thickness of front and frame does not exceed the cylinder length, so the lock seats correctly and functions smoothly. Antique brass finish aligns with traditional cabinetry where a darker, classic look is preferred. The lock uses a disc tumbler mechanism, providing a defined keying system that matches the manufacturer part C8060-C415A-4G for ordering consistency across projects. This cam lock is part of the CompX National cam locks class, so it fits typical cam lock use in woodworking and cabinet jobs. The design supports drawers and both right-hand and left-hand doors, helping standardize lock choice across multiple cabinet components on the same job.

Key Details That Support Cabinet Lock Projects

• Two stop washers allow the cam to turn either 90 degree or 180 degree CW and CCW, so you can set the rotation that best aligns with your door or drawer swing and strike location.
• Cams are provided for lipped or overlay construction with a straight cam with 1-1/2 inch extension, giving reach for overlay fronts where the cam must clear a face frame.
• A formed cam with 1-1/8 inch extension and 11/32 inch offset is provided for flush construction, so the cam can sit at the correct depth to engage the strike surface on face-frame or panel applications.
• The design is intended for drawers plus right-hand or left-hand doors, allowing the same lock style to be used across mixed cabinet layouts without changing hardware type.
• Key removable in both locked and unlocked positions allows the key to be withdrawn after locking or after opening, which can help match shop or facility key-handling habits.

Cam Lock Mounting And Fit For Cabinet Work

The 1-3/4 inch cylinder length defines how this lock mounts through the front and frame, because the combined thickness for an overlay application cannot exceed this cylinder length. For overlay layouts using a 3/4 inch front and 3/4 inch frame, the Web Description specifies using the NLC8073 lock with the NLC7014-2C cam, so this C8060-C415A-4G model is suited to overlay builds where total thickness stays within the listed cylinder length. Stop washers are provided for both 90 degree or 180 degree cam turns, giving flexibility to position the cam throw according to how the cabinet is built. This structure lets installers match the rotation and cam length to the cabinet geometry without changing the basic lock body.

Using This Antique Brass Cam Lock In The Field

Where This 1-3/4 Inch Cylinder Lock Fits Best

This CompX National disc tumbler cam lock is described for drawers and for right-hand or left-hand doors, so it works across many cabinet fronts in the same project. The antique brass finish aligns visually with cabinetry that uses warm-toned hinges and pulls, supporting a consistent hardware appearance. The cylinder length of 1-3/4 inch works in applications where the combined front and frame thickness is within that length, tying the product directly to typical cabinet construction using moderate material thickness. For overlay applications, the note about a 3/4 inch front and 3/4 inch frame directing you instead to the NLC8073 lock with NLC7014-2C cam highlights that this C8060-C415A-4G model is better suited to overlays where total material thickness is less than that combined 1-1/2 inch example. Cams are specified for lipped or overlay construction with a straight cam at 1-1/2 inch extension and for flush construction with a formed cam at 1-1/8 inch extension and 11/32 inch offset, so you can match the cam geometry to face-frame or flush-front cabinet types while using this same lock body.

Rotation, Keying, And Workflow Advantages On Jobs

The Web Description notes that each lock is supplied with two stop washers allowing cam turns of either 90 degree or 180 degree CW and CCW, so you can configure a quarter-turn or half-turn action to meet the door or drawer travel and preferred handle feel. Stop washers provided for both 90 degree or 180 degree cam turns also help standardize key rotation direction across multiple cabinets on the same installation by choosing the same configuration. Key removable in both locked and unlocked positions means the key can be pulled when the cabinet is secured or when it is open, supporting workflows where users either carry a key ring or leave locks ready for quick relocking. Stock keying is described with KA meaning all keyed alike to the specified key number, with a note that a master key will not work on these KA locks, and KD meaning all keyed different with various lock numbers, so specifiers can match either common-key access or individual-key control to the project requirements. This lock is identified by manufacturer part number C8060-C415A-4G and SAP description CAM LOCK, ANT BRS, 8060KA415, which aids in reordering the same configuration for future cabinet runs, repairs, or expansions where matching keying and appearance matters.

Common Questions About This CompX Cam Lock

Select This Antique Brass Cam Lock For Cabinet Work

This CompX National disc tumbler cam lock with 1-3/4 inch cylinder, antique brass finish, and cams for lipped, overlay, and flush construction ties directly to common cabinet layouts. Use the specified KA or KD stock keying, cylinder length, cam extensions, and 90 or 180 degree rotation options to align this C8060-C415A-4G lock with your woodworking projects where consistent appearance, defined keying, and configurable cam travel are required.