Rev-A-Shelf 6581 Series Stainless Steel 16"L x 2-1/8"D x 3"H x Self-close Sink Tip Out Tray, No Tab Stop - 6581-16-4

Choose this sink tip out tray

sink tip out tray from Rev-A-Shelf gives you a stainless steel sink tip out tray for the false front area at a sink cabinet. The Rev-A-Shelf 6581 Series tray measures 16 inches long, 2-1/8 inches deep, and 3 inches high. This self-close sink tip out tray is made of stainless steel with a stainless steel finish. It is offered as a sink tip out tray no tab stop configuration, which matters when matching a replacement or planning a new sink front tray setup. The product description also notes sink tip out hinges are available with and without hinges, so buyers should confirm the exact included hardware before ordering. For installers and repair work, this kitchen sink tip out tray is a straightforward way to use space behind a sink false front.

See practical gains from this tray

• Rev-A-Shelf stainless steel sink tip out tray - Stainless steel construction gives the sink front tray a durable material choice for wet sink cabinet areas.
• 16 inch tray length - The verified length helps buyers match a replacement tray to an existing sink front opening.
• 2-1/8 inch tray depth - The standard depth helps you check clearance behind the false front before installation.
• 3 inch tray height - The tray height helps confirm usable storage space for small sink-area items.
• Self-close sink tip out tray design - The self-close action supports a controlled closing motion during daily use.
• No tab stop configuration - This sink tip out tray no tab stop option helps buyers replace like-for-like parts when tab stops are not wanted.
• 6581 Series sink tip out tray - The series reference helps buyers stay within the correct Rev-A-Shelf product family.
• Stainless steel finish - The matching finish keeps the tray material and surface consistent throughout the product.

Confirm sink tip out tray fit

Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 16 inches long, 2-1/8 inches deep, and 3 inches high. Buyers should confirm the false front opening width, the available space behind the sink front, and whether a no tab stop tray matches the cabinet setup. Because this is a self-close sink tip out tray, verify that the intended hinge arrangement and closing action are compatible with your sink cabinet. If you are replacing an older sink front tray, compare length, depth, height, and stop style before ordering. Any safety, load, compliance, or installation tolerance details not shown here should be confirmed with the manufacturer or technical documentation.

What's included: Verified product data identifies a Rev-A-Shelf 6581 Series stainless steel self-close sink tip out tray. The web description states sink tip-out hinges are available with and without hinges, so included hardware should be confirmed before purchase.

What to verify before ordering: Confirm tray length, tray depth, tray height, false front size, sink cabinet clearance, no tab stop preference, and whether you need hinges included for your installation or replacement.

Compare sink tip out tray options

Use a sink front tray better

A sink tip out tray is typically chosen when a buyer wants to use the shallow space behind a sink false front for small items. In a kitchen or bath cabinet, that area often goes unused unless the false front is fitted with a tray and matching hinge setup. This Rev-A-Shelf sink tip out tray is intended for that style of application, and the verified dimensions give buyers a practical starting point for fit checks before they order.

For replacement work, the most common pain point is mismatched size. A tray that is too long may not fit the false front width, and a tray that is too deep can interfere with plumbing or the cabinet structure behind the front panel. This stainless steel sink tip out tray is verified at 16 inches long and 2-1/8 inches deep, so installers can compare those numbers to the existing opening and available clearance. The 3 inch height also matters because it affects the amount of usable tray space and how the tray sits behind the false front.

Another common issue is ordering the wrong stop style. This product is specifically identified as a sink tip out tray no tab stop model. If a buyer is replacing an existing sink tip out tray replacement and the old tray used a different stop arrangement, that should be checked before purchase. The same applies to hinge selection. The product family description states that sink tip out hinges are available with and without hinges, which means buyers should verify whether they need only the tray or a tray and hinge setup for the cabinet.

The self-close sink tip out tray design can also matter in daily use. Buyers looking for a kitchen sink tip out tray often want a tray that returns in a controlled way after access. Because this is a Rev-A-Shelf 6581 Series product made of stainless steel with a stainless steel finish, it aligns with buyers who want a metal sink front tray rather than a plastic insert. If your project involves a new cabinet build, a repair, or a direct replacement, confirm cabinet opening size, hinge needs, and the no tab stop detail before placing the order.

Compare stainless steel tray details

When comparing sink tip out tray options in general, buyers usually focus on material, dimensions, stop style, and whether hardware is included. This Rev-A-Shelf sink tip out tray gives you verified material and size information, which makes it easier to compare against existing cabinet conditions. Stainless steel matters for buyers who prefer a metal tray in a sink area, and the stainless steel finish keeps the product description clear and consistent.

Another useful comparison point is product family consistency. The 6581 Series designation helps buyers identify the correct tray line when they are matching an existing installation or specifying parts across multiple cabinets. A generic sink front tray may require more guesswork if the dimensions or stop style are unclear. Here, the verified dimensions and the no tab stop detail reduce that uncertainty.

Hardware details are also important in any comparison. Since the web description states sink tip-out hinges are available with and without hinges, buyers should not assume every tray listing includes the same hardware package. Confirming what is included helps avoid delays on install day. For trade buyers, that can prevent a return trip when a sink cabinet is already prepped for a tray installation.

In practical terms, this self-close sink tip out tray fits buyers who want a clearly identified Rev-A-Shelf stainless steel tray with stated dimensions and a no tab stop configuration. If another option does not clearly state material, length, depth, height, or hardware status, it may require extra verification before purchase. This product gives enough verified detail to support a cleaner fit check and a more predictable ordering process.

Ask fit questions before ordering

Order the right sink tip out tray

sink tip out tray selection goes more smoothly when you match the tray size and configuration to the cabinet before ordering. This Rev-A-Shelf stainless steel sink front tray is verified at 16 inches long, 2-1/8 inches deep, and 3 inches high, with a self-close design and no tab stop configuration. Before purchase, confirm false front dimensions, available clearance behind the panel, and whether hinges are included or need to be ordered separately for your installation.